The effects of mechanical alloying on the compressibility of aluminium matrix composite powder

被引：102
作者：
Fogagnolo, JB
Ruiz-Navas, EM
Robert, MH
Torralba, JM
机构：
[1] Univ Estadual Campinas, BR-13083970 Campinas, SP, Brazil
[2] Univ Carlos III Madrid, Madrid, Spain
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2003年 / 355卷 / 1-2期
关键词：
aluminium matrix composites; mechanical alloying; powder pressing;
D O I：
10.1016/S0921-5093(03)00057-1
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
High-energy milling changes the compressibility of powder material due to the work hardening effect and the changes in the powder morphology. Aluminium 6061 powder alloy reinforced with AlN was mechanically alloyed for different lengths of time and the compressibility of the obtained powder was determined. The results are explained in terms of the plastic deformation capacity of the powders, which is influenced by the hardness and the morphology of the powder. With increased milling time, powder compressibility is reduced. The equiaxed morphology of the as-received unreinforced aluminium powder also induces low compressibility, which is improved by the simple addition of reinforcement particles. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：50 / 55
页数：6
相关论文
共 50 条
[21]   Instrumented mechanical alloying of a novel superalloy powder [J].
McKimpson, MG ;
King, M .
POWDER MATERIALS: CURRENT RESEARCH AND INDUSTRIAL PRACTICES III, 2003, :273-289
[22]   Synthesis of nanocrystalline TiC powder by mechanical alloying [J].
Zhu, XK ;
Zhao, KY ;
Cheng, BC ;
Lin, QS ;
Zhang, XQ ;
Chen, TL ;
Su, YS .
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2001, 16 (1-2) :103-105
[23]   Microstructure and Characteristics of Ti-Nb-Sn-HA composite powder fabricated by Mechanical Alloying [J].
Wang, Xiaopeng ;
Xiao, Shulong ;
Chen, Yuyong ;
Liu, Zhiguang ;
Do Woo, Kee .
RECENT TRENDS IN MATERIALS AND MECHANICAL ENGINEERING MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 55-57 :886-+
[24]   Role of mechanical alloying parameters on powder distribution of Al/Cu alloy and Al/Cu composite [J].
Jamal, N. A. ;
Farazila, Y. ;
Ramesh, S. ;
Anuar, H. .
MATERIALS RESEARCH INNOVATIONS, 2014, 18 :190-195
[25]   Production and characterization of aluminium NbAl3 composite by mechanical alloying and in situ -: A process comparison. [J].
Urtiga, SL ;
Earthman, JC ;
Nieves, I ;
Robert, MH ;
Waked, TP .
ADVANCED POWDER TECHNOLOGY IV, 2005, 498-499 :158-163
[26]   Dispersion-strengthened aluminium prepared by mechanical alloying [J].
Besterci, M .
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2000, 15 (3-5) :356-408
[27]   OBTENTION OF ALUMINIUM-QUASICRYSTAL COMPOSITES BY MECHANICAL ALLOYING [J].
Vieira de Sousa, Fernando Luis ;
Romio, Pedro Cordeiro ;
Passos, Tiberio de Andrade ;
Guedes de Lima, Severino Jackson .
ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2, 2012, 727-728 :281-286
[28]   Synthesis and grain growth kinetics of in-situ FeAl matrix nanocomposites(I): Mechanical alloying of Fe-Al-Ti-B composite powder [J].
Ren Rong ;
Wu Yu-cheng ;
Tang Wen-ming ;
Wang Feng-tao ;
Wang Tu-gen ;
Zheng Zhi-xiang .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2007, 17 (05) :919-924
[29]   In situ synthesis of nanocrystalline Al6063 matrix nanocomposite powder via reactive mechanical alloying [J].
Asgharzadeh, H. ;
Simchi, A. ;
Kim, H. S. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19) :4897-4905
[30]   Trends in Aluminium Matrix Composite Development [J].
Ujah, Chika Oliver ;
Von Kallon, Daramy Vandi .
CRYSTALS, 2022, 12 (10)
12345