Carbonaceous composite materials from calcination of azo dye-adsorbed layered double hydroxide with enhanced photocatalytic efficiency for removal of Ibuprofen in water

Background The discard of used adsorbents may pose a great threat to human health and ecological environment. This work herein reported a facile and feasible method, with aims of (i) reusing the calcined layered double hydroxide (CLDH) adsorbent after azo dye adsorption, and (ii) being further used as a photocatalyst to enhance the degradation of typical pharmaceuticals. Calcination under inner gas flow has been utilized to carbonize adsorbed azo dye and a kind of novel carbonaceous CLDH composite material (CM-CLDH) was synthesized. This fabricated material was used as a catalyst for Ibuprofen removal in water samples under simulated sunlight irradiation. Results According to our experimental results, combination of carbonaceous material with CLDH showed an enhanced photocatalytic performance compared to original CLDH materials. More than 90% of Ibuprofen could be removed in less than 180 min. Introduction of carbon material narrowed catalyst's band gap and turned its conduct band potential to a more negative state, which brought considerable light absorption and higher oxidation ability of photo-induced electrons. Furthermore, photoluminescent spectra and transient photocurrent examination confirmed that carbon material suppressed recombination of photo-induced electrons and holes through faster electron transportation. Under experimental conditions, the removal efficiency of Ibuprofen by CM-CLDH composite kept above 90% during five cycles. Conclusion Calcination under inner gas flow can transform organic pollutant-adsorbed CLDH to CM-CLDH composite with higher photocatalytic performance. A feasible way to reuse spent LDH adsorbents was proposed, which is a benefit to reduce second pollution of spent adsorbents in environment.