Discontinuous dynamic recrystallization in α-Zr

被引:67
作者
Kapoor, Rajeev [1 ]
Reddy, G. Bharat [1 ]
Sarkar, Apu [1 ]
机构
[1] Bhabha Atom Res Ctr, Mat Grp, Bombay 400085, Maharashtra, India
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2018年 / 718卷
关键词
Discontinuous dynamic recrystallization; Zirconium; Hot deformation; HIGH-TEMPERATURE DEFORMATION; AUSTENITIC STAINLESS-STEEL; MICROSTRUCTURAL EVOLUTION; ELEVATED-TEMPERATURE; ANGULAR EXTRUSION; HOT DEFORMATION; ALUMINUM; STRAIN; ALLOYS; AL;
D O I
10.1016/j.msea.2018.01.117
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
This study attempts to identify the type of dynamic recrystallization (DRX) occurring in hot deformed zirconium. For this, samples of Zr were uniaxially compressed at 800 degrees C and 0.1 s(-1) to varying strains. Microstructural characterization was done using electron back scatter diffraction (EBSD). The flow stress showed an initial hardening followed by softening to a steady state value. DRX grains were identified as those with a grain orientation spread of less than 2 degrees. Fine recrystallized grains were observed along grain boundaries at low to intermediate strains (0.15 and 0.6). The grain size decreased with increasing strain up to a strain of 0.6, beyond which it showed no further decrease. The degree of misorientation of boundaries was used to distinguish between discontinuous and continuous dynamic recrystallization (dDRX and cDRX, respectively). Most recrystallized grains had their boundaries of very high misorientation (> 50 degrees) suggesting that dDRX was prevalent. The evidence of cDRX was weak, although it cannot be ruled out at higher strains. It was concluded that Zr undergoes dDRX when deformed at 800 degrees C and 0.1 s(-1).
引用
收藏
页码:104 / 110
页数:7
相关论文
共 42 条
[1]   Continuous dynamic recrystallization in low density steel [J].
Abedi, H. R. ;
Hanzaki, A. Zarei ;
Liu, Z. ;
Xin, R. ;
Haghdadi, N. ;
Hodgson, P. D. .
MATERIALS & DESIGN, 2017, 114 :55-64
[2]   RECRYSTALLIZATION PROCESS IN SOME POLYCRYSTALLINE METALS [J].
BAILEY, JE ;
HIRSCH, PB .
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1962, 267 (1328) :11-&
[3]   Effect of strain on evolution of dynamic recrystallization in Nb-1 wt%Zr-0.1 wt%C alloy at 1500 and 1600 °C [J].
Behera, A. N. ;
Kapoor, R. ;
Paul, B. ;
Chakravartty, J. K. .
MATERIALS CHARACTERIZATION, 2017, 126 :135-143
[4]   STRUCTURE OF DEFORMED ALUMINUM AND ITS RECRYSTALLIZATION - INVESTIGATIONS WITH TRANSMISSION KOSSEL DIFFRACTION [J].
BELLIER, SP ;
DOHERTY, RD .
ACTA METALLURGICA, 1977, 25 (05) :521-538
[5]   Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel [J].
Belyakov, A ;
Miura, H ;
Sakai, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 255 (1-2) :139-147
[6]   Geometric dynamic recrystallization in hot torsion of Al-SMg-0.6Mn (AA5083) [J].
Blum, W ;
Zhu, Q ;
Merkel, R ;
McQueen, HJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 205 (1-2) :23-30
[7]   PROCESSING MAP FOR HOT-WORKING OF ALPHA-ZIRCONIUM [J].
CHAKRAVARTTY, JK ;
PRASAD, YVRK ;
ASUNDI, MK .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (04) :829-836
[8]   HOT-WORKING CHARACTERISTICS OF ZIRCALOY-2 IN THE TEMPERATURE-RANGE OF 650-950-DEGREES-C [J].
CHAKRAVARTTY, JK ;
BANERJEE, S ;
PRASAD, YVRK ;
ASUNDI, MK .
JOURNAL OF NUCLEAR MATERIALS, 1992, 187 (03) :260-271
[9]   Texture evolution during hot deformation of Moly-TZM [J].
Chaudhuri, A. ;
Behera, A. N. ;
Kapoor, R. ;
Sarkar, A. ;
Chakravartty, J. K. ;
Suwas, S. .
17TH INTERNATIONAL CONFERENCE ON TEXTURES OF MATERIALS (ICOTOM 17), 2015, 82
[10]  
Chauvy C., 2006, Mater. Sci. Eng. A, V431, P59, DOI [10.1016/j.msea.2006.05.031, DOI 10.1016/J.MSEA.2006.05.031]