Computational Fluid Dynamic Modelling and Optimisation of Wastewater Treatment Plant Bioreactor Mixer

被引:5
作者
Elshaw, Andrew [1 ]
Hassan, Nur M. S. [1 ]
Khan, M. Masud K. [1 ]
机构
[1] Cent Queensland Univ, Sch Engn & Technol, Rockhampton, Qld 4701, Australia
关键词
wastewater treatment; computational fluid dynamics; hydrodynamic performance; specific power dissipation; anoxic zone;
D O I
10.3390/en11123530
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
This study aims to determine the optimal configuration (position and operation duration) for wall mounted mechanical mixers based on the comparison of three-dimensional computational fluid dynamics (CFD) modelling results and physical data collected from the treatment plant. A three dimensional model of anoxic zone in 1, 2 and 3 of Northern Wastewater Treatment Plant (NWWTP) located at Cairns Regional Council, Cairns, Queensland, Australia was developed and validated. The model was used to simulate the flow pattern of the WWTP and the simulation results are in good agreement with the physical data varying between 0% to 15% in key locations. The anoxic zones were subject to velocities less than the desired 0.3 m per second however results for mixed liquor suspended solids (MLSS) concentration indicate that good mixing is being achieved. Results for suspended solids concentrations suggest that the anoxic zones are towards the upper limits recommended by literature for specific power dissipation. The duration for operation of mechanical mixers was investigated and identified that the duration could be reduced from 900 s down to 150 s. Alternative mixer positioning was also investigated and identified positioning which would increase the average flow velocity with decreased duration (150 s). The study identified that Council may achieve savings of $28,500 per year through optimisation of the mechanical mixers and would be expected to extend the operational life of the mixers.
引用
收藏
页数:18
相关论文
共 19 条
  • [1] ANSYS Inc, TRAIN AG INTR ANSYS
  • [2] Australian Bureau of Statistics (ABS), COMM PROF CAIRNS LOC
  • [3] Mixing characterisation of full-scale membrane bioreactors: CFD modelling with experimental validation
    Brannock, M.
    Wang, Y.
    Leslie, G.
    [J]. WATER RESEARCH, 2010, 44 (10) : 3181 - 3191
  • [4] Brannock M., 2003, Computational Fluid Dynamics Tools for the Design of Mixed Anoxic Wastewater Treatment Vessels
  • [5] Cable M., 2009, THESIS
  • [6] Daigger G.T., 2011, Biological Wastewater Treatment, DOI DOI 10.1201/B13775
  • [7] De Haas D., BENCHMARKING WASTEWA
  • [8] Elshaw Andrew, 2016, 2016 3rd Asia-Pacific World Congress on Computer Science and Engineering (APWC on CSE), P232, DOI 10.1109/APWC-on-CSE.2016.046
  • [9] Grady C.P. L., 1980, BIOL WASTEWATER TREA
  • [10] Optimal design and operation of activated sludge processes: State-of-the-art
    Hreiz, Rainier
    Latifi, M. A.
    Roche, Nicolas
    [J]. CHEMICAL ENGINEERING JOURNAL, 2015, 281 : 900 - 920