Tribological properties of Ni-base alloy composite coating modified by both graphite and TiC particles

被引：42

作者：

Cai Bin ^{[1
]}

Tan Ye-fa ^{[1
]}

Tu Yi-qiang ^{[1
]}

Wang Xiao-long ^{[1
]}

Tan Hua ^{[1
]}

机构：

[1] PLA Univ Sci & Technol, Dept Mech Engn, Nanjing 210007, Jiangsu, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2011年 / 21卷 / 11期

关键词：

Ni-base alloy; plasma spraying; composite coating; graphite; TiC; tribology; WEAR PERFORMANCE; BEHAVIOR; MICROSTRUCTURE; MATRIX;

D O I：

10.1016/S1003-6326(11)61031-5

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In order to reduce the friction coefficient of Ni-base alloy coating and further improve its wear resistance, Ni-base alloy composite coatings modified by both graphite and TiC particles were prepared by plasma spray technology on the surface of 45 carbon steel. The results show that friction coefficient of the composite coating is 47.45% lower than that of the Ni-base alloy coating, and the wear mass loss is reduced by 59.1%. Slip lines and severe adhesive plastic deformation are observed on the worn surface of the Ni-base alloy coating, indicating that the wear mechanisms of the Ni-base alloy coating are multi-plastic deformation wear and adhesive wear. A soft transferred layer abundant in graphite and ferric oxide is developed on the worn surface of the composite coating, which reduces the friction coefficient and wear loss in a great deal. The main wear mechanism of the composite coating is fatigue delamination of the transferred layer.

引用

页码：2426 / 2432

页数：7

共 16 条

[1]

Editor committee of < Manual of Chinese aeronautic materials, 2001, MAN CHIN AER MAT, P186

[2]

[何宜柱 He Yizhu], 2002, [机械工程材料, Materials for Mechanical Engineering], V26, P18

[3]

LI Bing-hui, 2006, METALLOGRAPHIC ATLAS, P1932

[4] Microstructure and dry sliding wear behavior of laser clad Ni-based alloy coating with the addition of SiC [J].

Li, Q ;

Song, GM ;

Zhang, YZ ;

Lei, TC ;

Chen, WZ .

WEAR, 2003, 254 (3-4) :222-229

[5] Microstructure and abrasive wear performance of chromium carbide reinforced Ni3Al matrix composite coating [J].

Li, Shangping ;

Feng, Di ;

Luo, Heli .

SURFACE & COATINGS TECHNOLOGY, 2007, 201 (08) :4542-4546

[6] A study on process and tribological behavior of Al alloy Gr.(p) composite [J].

Lin, CB ;

Chang, RJ ;

Weng, WP .

WEAR, 1998, 217 (02) :167-174

[7] Abrasion resistance of thermal sprayed composite coatings with a nickel alloy matrix and a WC hard phase. Effect of deposition technique and re-melting [J].

Miranda, JC ;

Ramalho, A .

TRIBOLOGY LETTERS, 2001, 11 (01) :37-48

[8] TRIBOLOGICAL BEHAVIOR OF LASER-CLAD TICP COMPOSITE COATING [J].

OUYANG, JH ;

PEI, YT ;

LEI, TC ;

ZHOU, Y .

WEAR, 1995, 185 (1-2) :167-172

[9]

[潘蛟亮 PAN Jiaoliang], 2008, [摩擦学学报, Tribology], V28, P225

[10] An experimental study of the wear performance of NiCrBSi thermal spray coatings [J].

Rodríguez, J ;

Martín, A ;

Fernández, R ;

Fernández, JE .

WEAR, 2003, 255 :950-955

← 1 2 →