Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing

被引：3

作者：

Tavoosi, M. ^{[1
,2
]}

Karimzadeh, F. ^{[2
]}

Enayati, M. H. ^{[2
]}

Kim, H. S. ^{[1
]}

机构：

[1] Pohang Univ Sci & Technol POSTECH, Dept Mat Sci & Engn, Pohang 790784, South Korea

[2] IUT, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran

来源：

JOURNAL OF NANOMATERIALS | 2012年 / 2012卷

基金：

新加坡国家研究基金会;

关键词：

MECHANICAL-PROPERTIES; CRYSTALLIZATION PROCESS; COMPACTION BEHAVIOR; AL; FABRICATION; MICROSTRUCTURES; COMPOSITE; ALLOYS; MODEL;

D O I：

10.1155/2012/814915

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The current study investigates the feasibility of fabricating amorphous Al80Fe10Ti5Ni5 powders by mechanical alloying and consolidating them into bulk samples by a hot-pressing technique. As-milled and hot-pressed samples were examined by X-ray diffraction, scanning electron microscopy, transition electron microscopy, and differential scanning calorimetry. The results showed that milling of Al80Fe10Ti5Ni5 powder for 40 h and hot pressing at 550 degrees C under 600 MPa led to a fully dense bulk sample. During consolidation, an AlTi intermetallic phase with average crystallite size of 10 nm precipitates in the amorphous matrix.

引用

页数：10

共 50 条

[31] Development of amorphous phase dispersed Al-rich composites by rolling of mechanically alloyed amorphous Al-Ni-Ti powders with pure Al
Samanta, A.
Fecht, H.-J.
Manna, I.
Chattopadhyay, P. P.
MATERIALS CHEMISTRY AND PHYSICS, 2007, 104 (2-3) : 434 - 438
[32] Study of the microstructure of nanocrystalline Al-5 at.% Ti compacts prepared by reactive ball milling and ultra-high-pressure hot pressing
Moon, KI
Park, HS
Lee, KS
JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 325 (1-2) : 236 - 244
[33] Consolidation of the Cu46Zr42Al7Y5 Amorphous Ribbons and Powder Alloy by Hot Extrusion
Melle, Ana Karla
Peres, Mauricio Mhirdaui
Bolfarini, Claudemiro
Botta, Walter Jose
Jorge, Alberto Moreira, Jr.
Kiminami, Claudio Shyinti
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2012, 15 (05): : 728 - 731
[34] Crystallization Kinetics of Ti50Fe22Ni22Sn6 Amorphous Powders
Zhu, Yuying
Li, Qiang
He, Yunhua
Wang, Ge
Wang, Xinghua
MECHANICAL ENGINEERING AND MATERIALS SCIENCE, 2012, 108 : 12 - +
[35] Hot Hydrostatic Extrusion of Mechanically Alloyed Al-4.9Fe-4.9Ni Powders
Guoxian LIANG
Zhimin LI and Erde WANG (Dept. of Metals Science and Technology
JournalofMaterialsScience&Technology, 1994, (04) : 285 - 288
[36] THE DESIGN OF Ti-5Al-5Mo-5V-3Cr ELEMENTAL POWDERS MIXTURE PROCESSING
Zygula, K.
Wojtaszek, M.
ARCHIVES OF METALLURGY AND MATERIALS, 2020, 65 (01) : 283 - 289
[37] Microstructure and magnetic viscosity of bulk amorphous Nd60Fe20Al5Co10B5 alloy
Tan, X. H.
Xu, H.
Man, H.
Tang, Y. J.
Yang, L. P.
Bai, Q.
JOURNAL OF APPLIED PHYSICS, 2011, 109 (08)
[38] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF BORIDE-DISPERSED COMPOSITES FABRICATED BY HOT-PRESSING AMORPHOUS NI60MO30B10 POWDERS
NOZUE, A
OTSUKA, M
SUZUKI, H
TAKAYAMA, M
TAGUCHI, H
OKUBO, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1994, 58 (07) : 740 - 745
[39] Changes in short-range order of Zr55Cu30Al10Ni5 and Zr55Cu20Al10Ni10Ti5 BMGs upon annealing
Stoica, Mihai
Van Steenberge, Nele
Bednarcik, Jozef
Mattern, Norbert
Franz, Hermann
Eckert, Juergen
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 506 (01) : 85 - 87
[40] Extrusion of nanocomposite Al90Fe5Nd5 characterization of the consolidated powders and material
Cardoso, KR
Escorial, AG
Lieblich, M
Botta, WJ
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 344 (1-2): : 57 - 63

← 1 2 3 4 5 →