Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing

被引：3

作者：

Tavoosi, M. ^{[1
,2
]}

Karimzadeh, F. ^{[2
]}

Enayati, M. H. ^{[2
]}

Kim, H. S. ^{[1
]}

机构：

[1] Pohang Univ Sci & Technol POSTECH, Dept Mat Sci & Engn, Pohang 790784, South Korea

[2] IUT, Nanotechnol & Adv Mat Inst, Dept Mat Engn, Esfahan 8415683111, Iran

来源：

JOURNAL OF NANOMATERIALS | 2012年 / 2012卷

基金：

新加坡国家研究基金会;

关键词：

MECHANICAL-PROPERTIES; CRYSTALLIZATION PROCESS; COMPACTION BEHAVIOR; AL; FABRICATION; MICROSTRUCTURES; COMPOSITE; ALLOYS; MODEL;

D O I：

10.1155/2012/814915

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The current study investigates the feasibility of fabricating amorphous Al80Fe10Ti5Ni5 powders by mechanical alloying and consolidating them into bulk samples by a hot-pressing technique. As-milled and hot-pressed samples were examined by X-ray diffraction, scanning electron microscopy, transition electron microscopy, and differential scanning calorimetry. The results showed that milling of Al80Fe10Ti5Ni5 powder for 40 h and hot pressing at 550 degrees C under 600 MPa led to a fully dense bulk sample. During consolidation, an AlTi intermetallic phase with average crystallite size of 10 nm precipitates in the amorphous matrix.

引用

页数：10

共 50 条

[21] Al13Fe4-Al Composites with Nanocrystalline Matrix Manufactured by Hot-Pressing of Milled Powders [J].

Krasnowski, Marek ;

Gierlotka, Stanislaw ;

Zasada, Dariusz .

MATERIALS, 2022, 15 (12)

[22] Tribological Behavior of Ti-5Al-2.5Sn, Ti-10V-2Fe-3Al and Ti-38Al Carburized via Current Heating Technique with Graphite Powders [J].

Boonruang, Chatdanai ;

Thong-on, Atcharawadi .

MATERIALS TRANSACTIONS, 2014, 55 (07) :1073-1082

[23] Investigation of mechanosynthesized Fe50Ni40Al10 powders [J].

Hadef, F. ;

Otmani, A. ;

Djekoun, A. ;

Greneche, J. M. .

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2013, 343 :214-220

[24] Microstructural evolution of Al-20Si-5Fe alloy during rapid solidification and hot consolidation [J].

MRajabi ;

MVahidi ;

ASimchi ;

PDavami .

RareMetals, 2009, 28 (06) :639-645

[25] Microstructural evolution of Al-20Si-5Fe alloy during rapid solidification and hot consolidation [J].

Rajabi, M. ;

Vahidi, M. ;

Simchi, A. ;

Davami, P. .

RARE METALS, 2009, 28 (06) :639-645

[26] Microstructural evolution of Al-20Si-5Fe alloy during rapid solidification and hot consolidation [J].

M. Rajabi ;

M. Vahidi ;

A. Simchi ;

P. Davami .

Rare Metals, 2009, 28 :639-645

[27] Unveiling hot deformation behavior and microstructural evolution in Fe-21Mn-10Al-(5Ni)-C alloys [J].

Jia, Xiaoliang ;

Gao, Guhui ;

Jiang, Sicheng ;

Misra, R. D. K. ;

Gui, Xiaolu ;

Feng, Chun .

JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1012

[28] Fabrication of nanopowder and consolidation of nanocrystalline 5Ni0.6Fe0.4-Al2O3 composite by rapid sintering [J].

Na-Ra Park ;

Myeong-Ku Choe ;

Je-Shin Park ;

Wonbaek Kim ;

In-Jin Shon .

Metals and Materials International, 2009, 15 :765-769

[29] Fabrication of Nanopowder and Consolidation of Nanocrystalline 5Ni0.6Fe0.4-Al2O3 Composite by Rapid Sintering [J].

Park, Na-Ra ;

Choe, Myeong-Ku ;

Park, Je-Shin ;

Kim, Wonbaek ;

Shon, In-Jin .

METALS AND MATERIALS INTERNATIONAL, 2009, 15 (05) :765-769

[30] Influence of Gd and Fe on crystallization of Al87Y5Ni8 amorphous alloy [J].

Mika, T. ;

Karolus, M. ;

Haneczok, G. ;

Bednarska, L. ;

Lagiewka, E. ;

Kotur, B. .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2008, 354 (27) :3099-3106

← 1 2 3 4 5 →