STUDY OF THE EFFECT OF DEFORMATION ON TRANSFORMATION DIAGRAMS OF TWO LOW-ALLOY MANGANESE-CHROMIUM STEELS

被引：6

作者：

Kawulok, R. ^{[1
]}

Kawulok, P. ^{[1
]}

Schindler, I. ^{[1
]}

Opela, P. ^{[1
]}

Rusz, S. ^{[1
]}

Sevcak, V. ^{[1
]}

Solowski, Z. ^{[2
]}

机构：

[1] VSB Tech Univ Ostrava, Fac Met & Mat Engn, 17 Listopadu 15-2172, Ostrava 70833, Czech Republic

[2] Trinecke Zelezarny AS, Prumyslova 1000, Trinec 73961, Czech Republic

来源：

ARCHIVES OF METALLURGY AND MATERIALS | 2018年 / 63卷 / 04期

关键词：

CCT and DCCT diagrams; 16MnCrS5; and; 20MnCrS5; steels; Dilatometric tests; Microstructure; BAINITE TRANSFORMATION; PHASE-TRANSFORMATIONS; TEMPERATURE; MICROSTRUCTURE; PEARLITE; KINETICS; GRADES;

D O I：

10.24425/amm.2018.125099

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The work deal with an assembling and comparing of transformation diagrams of two low-alloy steels, specifically 16MnCrS5 and 20MnCrS5. In this work, diagrams of the type of CCT and DCCT of both steels were assembled. Transformation diagrams were assembled on the basis of dilatometric tests realized on the plastometer Gleeble 3800, of metallographic analyses and of hardness measurements. In addition, for comparison, the transformation diagrams were assembled even with use of the QTSteel 3.2 software. Uniform austenitization temperature of 850 degrees C was chosen in case of both steels and even both types of diagrams. In case of both steels, an influence of deformation led to expected acceleration of phase transformations controlled by diffusion and also of bainite transformation. In both cases, the kinetics of martensitic transformation was not significantly affected by deformation.

引用

页码：1735 / 1741

页数：7

共 50 条

[21] Effect of microstructure on corrosion rate for selected grades of low-alloy high wear resisted steels with boron [J].

Letkowska, Beata ;

Dudzinski, Wlodzimierz ;

Klakocar-Ciepacz, Magdalena .

OCHRONA PRZED KOROZJA, 2012, 55 (11) :525-527

[22] Effect of boundaries on toughness in high-strength low-alloy steels from the view of crystallographic misorientation [J].

Li, Xiucheng ;

Zhao, Jingxiao ;

Wang, Jingliang ;

Wang, Xuelin ;

Liu, Shilong ;

Shang, Chengjia .

MATERIALS LETTERS, 2020, 259

[23] The influence of temperature-time parameter of welded joints thermal treatment on strength-related characteristics of chromium-molybdenum and low-alloy manganese steels [J].

Kumslytis, Vigantas ;

Valiulis, Algirdas Vaclovas ;

Cernasejus, Olegas .

MATERIALS SCIENCE-MEDZIAGOTYRA, 2007, 13 (02) :123-126

[24] Phase constitution effect on the ductility of low alloy multiphase transformation induced plasticity steels [J].

Zhu, R. ;

Li, S. ;

Song, M. ;

Karaman, I. ;

Arroyave, R. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 569 :137-143

[25] Effect of Mo and Cr on the Microstructure and Properties of Low-Alloy Wear-Resistant Steels [J].

Xia, Tian ;

Ma, Yuxi ;

Zhang, Yunshuang ;

Li, Jialiang ;

Xu, Hao .

MATERIALS, 2024, 17 (10)

[26] Effect of silicon and prior deformation of austenite on isothermal transformation in low carbon steels [J].

Minghui CAI Hua DING Jiansu ZHANG and Long LI School of Materials and MetallurgyNortheastern UniversityShenyang China Technology CenterBaoshan Iron and Steel CoLtdShanghai China National Institute for Materials ScienceTsukuba Japan .

ActaMetallurgicaSinica(EnglishLetters), 2009, 22 (02) :100-109

[27] Effect of silicon and prior deformation of austenite on isothermal transformation in low carbon steels [J].