Air and PCM cooling for battery thermal management considering battery cycle life

被引:210
作者
Chen, Fenfang [1 ]
Huang, Rui [1 ]
Wang, Chongming [3 ]
Yu, Xiaoli [1 ]
Liu, Huijun [1 ,2 ]
Wu, Qichao [1 ]
Qian, Keyu [1 ]
Bhagat, Rohit [3 ]
机构
[1] Zhejiang Univ, Coll Energy Engn, Hangzhou 310027, Peoples R China
[2] Zotye Automot Co LTD, Hangzhou 310018, Peoples R China
[3] Coventry Univ, Inst Future Transport & Cities, Coventry CV1 5FB, W Midlands, England
关键词
Lithium-ion battery; Thermal management; Air cooling; PCM cooling; Cycle life; HYBRID ELECTRIC VEHICLE; LITHIUM ION BATTERIES; POWER MANAGEMENT; ENERGY-STORAGE; AGING MECHANISMS; HEAT-PIPE; PERFORMANCE; SYSTEM; PACKS; OPTIMIZATION;
D O I
10.1016/j.applthermaleng.2020.115154
中图分类号
O414.1 [热力学];
学科分类号
摘要
Cycle life of lithium-ion batteries (LIBs) is essential for the application of hybrid electric vehicles (HEV) and electric vehicles (EV). Since temperature greatly affects degradation rate and safety of LIBs, battery thermal management system (BTMS) is required. In this paper, the performance of active air cooling and passive phase change material (PCM) cooling for BTMS are assessed in terms of battery thermal states and cycle life. A coupled one-dimensional electrochemical and two-dimensional thermal models are developed to simulate the temperature of a battery module with 16 cylindrical (26650) graphite-LiFePO4 lithium-ion battery cells. The model is validated with the experimental data taken from literature. By applying a realistic current profile of a HEV to the battery model, simulations are performed at various ambient temperatures, inlet velocities of air cooling and PCM phase change temperatures. The battery cycle life and its non-uniformity across the module are estimated with a battery degradation model with inputs of battery temperature results. The study shows that active air cooling has a better cooling effect than PCM cooling, especially at high ambient temperatures. But the active air cooling leads to a large temperature non-uniformity at low inlet air velocities. The cycle life of the battery module under air cooling is longer than that of PCM cooling, although a larger life non-uniformity is observed. Furthermore, two methods are compared by a newly proposed evaluation index called cyclical cost. This index considers both the battery cycle life and the parasitic power consumption of the BTMS. The result demonstrates that air cooling has a lower cyclical cost than PCM cooling. When the inlet velocity of the air cooling system increases, the cyclical cost has a trend of decreasing first and then increasing. This paper provides a guide for the development of BTMS to further prolong the cycle life and reduce total operating cost of LIBs.
引用
收藏
页数:22
相关论文
共 46 条
[1]   Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles [J].
Al-Zareer, Maan ;
Dincer, Ibrahim ;
Rosen, Marc A. .
JOURNAL OF POWER SOURCES, 2017, 363 :291-303
[2]   An improved theoretical electrochemical-thermal modelling of lithium-ion battery packs in electric vehicles [J].
Amiribavandpour, Parisa ;
Shen, Weixiang ;
Mu, Daobin ;
Kapoor, Ajay .
JOURNAL OF POWER SOURCES, 2015, 284 :328-338
[3]   A review on lithium-ion battery ageing mechanisms and estimations for automotive applications [J].
Barre, Anthony ;
Deguilhem, Benjamin ;
Grolleau, Sebastien ;
Gerard, Mathias ;
Suard, Frederic ;
Riu, Delphine .
JOURNAL OF POWER SOURCES, 2013, 241 :680-689
[4]  
Dodd J.L., 2007, Phase Composition and Dynamical Studies of Lithium Iron Phosphate
[5]   MODELING OF GALVANOSTATIC CHARGE AND DISCHARGE OF THE LITHIUM POLYMER INSERTION CELL [J].
DOYLE, M ;
FULLER, TF ;
NEWMAN, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1993, 140 (06) :1526-1533
[6]   Orthogonal experimental design of liquid-cooling structure on the cooling effect of a liquid-cooled battery thermal management system [J].
E, Jiaqiang ;
Han, Dandan ;
Qiu, An ;
Zhu, Hao ;
Deng, Yuanwang ;
Chen, Jingwei ;
Zhao, Xiaohuan ;
Zuo, Wei ;
Wang, Hongcai ;
Chen, Jianmei ;
Peng, Qingguo .
APPLIED THERMAL ENGINEERING, 2018, 132 :508-520
[7]   SIMULATION AND OPTIMIZATION OF THE DUAL LITHIUM ION INSERTION CELL [J].
FULLER, TF ;
DOYLE, M ;
NEWMAN, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1994, 141 (01) :1-10
[8]   Micro-Short-Circuit Diagnosis for Series-Connected Lithium-Ion Battery Packs Using Mean-Difference Model [J].
Gao, Wenkai ;
Zheng, Yuejiu ;
Ouyang, Minggao ;
Li, Jianqiu ;
Lai, Xin ;
Hu, Xiaosong .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (03) :2132-2142
[9]   Experimental demonstration of active thermal control of a battery module consisting of multiple Li-ion cells [J].
He, Fan ;
Wang, Haoting ;
Ma, Lin .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 91 :630-639
[10]   Battery charge equalization controller in electric vehicle applications: A review [J].
Hoque, M. M. ;
Hannan, M. A. ;
Mohamed, A. ;
Ayob, A. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2017, 75 :1363-1385