共 50 条
Ultrasound-assisted oil removal of γ-Al2O3-based spent hydrodesulfurization catalyst and microwave roasting recovery of metal Mo
被引:29
作者:
Wang, Lu
[1
,3
,4
,5
]
Chao, Liu
[1
,3
,4
,5
]
Qu, Wenwen
[1
,2
,4
,5
]
Xu, Shengming
[6
,7
]
Zhang, Libo
[1
,3
,4
,5
]
Peng, Jinhui
[1
,3
,4
,5
]
Ye, Xiaolei
[1
,3
,4
,5
]
机构:
[1] Kunming Univ Sci & Technol, State Key Lab Complex Nonferrous Met Resources Cl, Kunming 650093, Yunnan, Peoples R China
[2] Kunming Univ Sci & Technol, Fac Sci, Kunming 650500, Yunnan, Peoples R China
[3] Kunming Univ Sci & Technol, Fac Met & Energy Engn, Kunming 650093, Yunnan, Peoples R China
[4] Minist Educ, Key Lab Unconvent Met, Kunming 650093, Yunnan, Peoples R China
[5] Natl Local Joint Lab Engn Applicat Microwave Ener, Kunming 650093, Yunnan, Peoples R China
[6] Tsinghua Univ, Inst Nucl & New Energy Technol, Beijing 100084, Peoples R China
[7] Tsinghua Univ, Beijing Key Lab Radioact Wastes Treatment, Beijing 100084, Peoples R China
基金:
中国国家自然科学基金;
关键词:
Spent HDS catalyst;
Oil removal;
Ultrasonic;
Microwave;
Leaching;
PROCESS OPTIMIZATION;
MOLYBDENUM;
EXTRACTION;
VANADIUM;
REGENERATION;
OXIDATION;
LEACHATE;
NICKEL;
WASTE;
D O I:
10.1016/j.ultsonch.2018.05.023
中图分类号:
O42 [声学];
学科分类号:
070206 ;
082403 ;
摘要:
Currently, roasting-leaching is the main treatment process of spent hydrodesulfurization (HDS) catalyst, but it will produce impurities, such as nickel molybdate and cobalt molybdate (NiMoO4 or CoMoO4), which is adverse to recover valuable metals. In this paper, a combined ultrasonic-microwave method was developed to remove oil and recover molybdenum (Mo) from the spent HDS catalyst. Firstly, ethanol was used to extract the surface oil of the spent MoNiCo/Al2O3 catalyst with ultrasonic assistance. Effects of temperature, ultrasonic time, liquid-solid ratio and ultrasonic power on the oil removal rate were investigated systematically and the process conditions were optimized using response surface methodology (RSM). The results showed that the oil removal rate was over 99% under the optimum conditions of temperature 55 degrees C, ultrasonic time 2 h, liquid to solid ratio 5:1, and ultrasonic power 600 W. After oil removal, the sample was roasted in microwave field at 500 degrees C for 15 min. The generation of toxic gas could be effectively avoided and no hardest-to-recycle impurity CoMoO4 was found. At last, the roasted sample was subjected to ultrasonic leaching with sodium carbonate (Na2CO3) solution for recovering Mo. Extraction of Mo of the deoiled sample after microwave roasting reached 94.3%, which is about 7% higher than that of oily sample. Moreover, microwave roasting method resulted in a much higher Mo extraction than traditional method for both the oily and deoiled spent catalyst. It was concluded that the ultrasonic-microwave assisted method could remarkably improve the recovery of Mo and greatly shorten the processing time.
引用
收藏
页码:24 / 32
页数:9
相关论文
共 50 条