Separation of butyric acid in fixed bed column with solvent impregnated resin containing ammonium ionic liquid

Batch equilibrium and fixed bed column extraction experiments for the extraction of butyric acid (BA) into solvent impregnated resin (SIR) have been done. Microporous Amberlite XAD-1180N was impregnated with an ammonium ionic liquid (IL) trialkylmethylammonium bis(2,4,4-trimethylpentyl)phosphinate. The BA extraction capacity isotherm has not a Langmuir type shape and no finite capacity was observed. The loading of the impregnated IL with the extracted BA at 37 degrees C is in agreement with the loading from L/L extraction equilibrium of BA at 25 degrees C. Capacity of freshly prepared SIR particles is superior to classical porous ion-exchangers. Both the temperature and the superficial velocity in column influence the shape of the breakthrough-curve in fixed bed extraction of BA using SIR. Sharpening of the breakthrough curve was observed with the increasing temperature and decreasing superficial velocity. Stripping with water is not efficient for the regeneration of the loaded column after extraction because of low concentration of the product acid in the obtained effluent. Higher BA concentration was achieved by stripping with 0.15 kmol m(-3) and 0.075 kmol m(-3) NaOH solutions. The combination of initial water stripping coupled with consecutive stripping by alkali can be beneficial for decreasing the consumption of chemicals and further processing of the product. After two extraction/stripping cycles, a stable capacity was achieved and sustained for 14 cycles, showing the possibility of long-term application of the prepared SIR in real technology. (C) 2015 Published by Elsevier B.V.