Effects of Al-Si/SiCp powder on the sinterability and wear properties of Al-Zn-Mg powder

被引:6
作者
Lee, Eun Sun [1 ]
Oak, Jeong-Jung [2 ,3 ]
Bang, Jeongil [1 ,4 ]
Park, Yong Ho [1 ]
机构
[1] Pusan Natl Univ, Dept Mat Sci & Engn, Busan 46141, South Korea
[2] Pusan Natl Univ, Global Core Res Ctr Ships & Offshore Plants, Busan 46141, South Korea
[3] DAE IL Corp, Mat Anal Lab, Ulsan 44911, South Korea
[4] Samsung Elect Co Ltd, Platform Technol Lab, Suwon 16678, South Korea
基金
新加坡国家研究基金会;
关键词
Metal-matrix composites; Powder metallurgy; Sintering; Wear properties; DRY SLIDING WEAR; ALUMINUM COMPOSITES; ABRASIVE WEAR; BEHAVIOR; TRANSITIONS; FRICTION; POROSITY; 2-BODY; ALLOY; MILD;
D O I
10.1016/j.jallcom.2016.07.215
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Al-Zn-Mg alloys are widely used in the aerospace and automotive industries because of their high strength compared to other Al-based alloys. Unfortunately, the application of Al-Zn-Mg alloys in such industries has been limited to parts that are manufactured via powder metallurgy because of their poor sinterability. In this study, an Al-Si alloy powder, which has a relatively low melting point alloy compared to Al-Zn-Mg alloys, was added into an Al-Zn-Mg powder (Alumix 431) as a binder material to enhance the sinterability of the alloy. In addition, SiC particles (SiCp) were added into the Al-Si alloy powder via gas atomization to improve the mechanical properties and wear resistance of the sintered Alumix 431 alloy. The mixed powder was sintered via hot pressing, and the wear properties of the sintered samples were analyzed with respect to two variables: vertical load and linear speed. The observed wear mechanisms included abrasion, adhesion, oxide-layer formation, and delamination. When the Alumix 431 powder was mixed with 5 wt% of the Al-Si/ SiCp alloy powder, the various aforementioned wear behaviors were delayed because of the increased densification of the sintered alloy and reinforcing effect of the SiCp. (C) 2016 Elsevier B. V. All rights reserved.
引用
收藏
页码:145 / 152
页数:8
相关论文
共 34 条
[1]   On the interdependence between kinetics of friction-released thermal energy and the transition in wear mechanisms during sliding of metallic pairs [J].
Abdel-Aal, H .
WEAR, 2003, 254 (09) :884-900
[2]   EFFECT OF SIC PARTICULATE REINFORCEMENT ON THE DRY SLIDING WEAR OF ALUMINUM SILICON ALLOYS (A356) [J].
ALPAS, AT ;
ZHANG, J .
WEAR, 1992, 155 (01) :83-104
[3]   AN EXPERIMENTAL AND NUMERICAL STUDY OF DEFORMATION IN METAL CERAMIC COMPOSITES [J].
CHRISTMAN, T ;
NEEDLEMAN, A ;
SURESH, S .
ACTA METALLURGICA, 1989, 37 (11) :3029-3050
[4]   Abrasive wear of metallic matrix reinforced materials [J].
Colaço, R ;
Vilar, R .
WEAR, 2003, 255 :643-650
[5]   Dry sliding wear of aluminium composites - A review [J].
Deuis, RL ;
Subramanian, C ;
Yellup, JM .
COMPOSITES SCIENCE AND TECHNOLOGY, 1997, 57 (04) :415-435
[6]   THE ROLE OF POROSITY IN THE DRY SLIDING WEAR OF A SINTERED FERROUS ALLOY [J].
DUBRUJEAUD, B ;
VARDAVOULIAS, M ;
JEANDIN, M .
WEAR, 1994, 174 (1-2) :155-161
[7]   Two-body and three-body abrasion: A critical discussion [J].
Gates, JD .
WEAR, 1998, 214 (01) :139-146
[8]   Influence of porosity on dry sliding wear behavior in spray deposited Al-6CuMn/SiCp composite [J].
Gui, MC ;
Kang, SB ;
Lee, JM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 293 (1-2) :146-156
[9]   PARTICULATE REINFORCED METAL MATRIX COMPOSITES - A REVIEW [J].
IBRAHIM, IA ;
MOHAMED, FA ;
LAVERNIA, EJ .
JOURNAL OF MATERIALS SCIENCE, 1991, 26 (05) :1137-1156
[10]   LIGHTWEIGHT MATERIALS FOR AIRCRAFT APPLICATIONS [J].
IMMARIGEON, JP ;
HOLT, RT ;
KOUL, AK ;
ZHAO, L ;
WALLACE, W ;
BEDDOES, JC .
MATERIALS CHARACTERIZATION, 1995, 35 (01) :41-67