Convergence of rule-of-thumb sizing and allocating rules of distributed generation in meshed power networks

This paper presents different approaches to find out and address some rules for distributed generation (DG) integrated mesh type networks, which can be used in the management of future power systems. There are so many influencing factors of efficiency in the integration of DG that we need to analyze these influencing factors obviously. Hence, carefully planning plays a key role in tackling these challenges in the future power systems. In contrast to the majority of existing observations, we focus on the case where the underlying states are multiple and single DG allocations with changing conditions. In several previous studies, the best single bus has been investigated under the specified conditions. However, it follows from the results of this study that all issues concerning DG strongly depend on power network structure and DG locations, and it is worth to note that the best location changes with penetration levels. Also, it is observed that the all buses show different characteristics in terms of DG integrations under the different cases, moreover their optimum size and power factor are different. It means that optimum bus in a network changes with the conditions. On the other hand, the problematic buses can be occurred in voltage profile after the DG integration. As a result, an investigation of rule of thumb approach is performed for evaluation of performance enhancement of DG integrated meshed networks. The results are also used to discuss the integration of DG management strategies under various operating conditions. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.