Influence of shape and locations of initial 3-D cracks on their growth in uniaxial compression

Mechanisms of 3-D crack development in uniaxial compression have been studied. Several tests undertaken on different transparent casting resin, cement and mortar samples with single internal cracks of different shapes and sizes, produced by different techniques, demonstrated that 3-D crack growth in compression was qualitatively different from the two-dimensional case. Unlike 2-D cracking, there were intrinsic limits on 3-D growth of wing cracks produced by a single pre-existing crack. This limitation was related to the wrapping (curving) of emerging wings around the initial crack. On the other hand, in samples with few initial cracks, a special crack arrangement existed which could produce a large tensile fracture parallel to the direction of loading. Particularly, for two coplanar initial cracks, the tensile fracture was produced only when the inter-crack spacing was below a critical value. In samples where the initial cracks were present in high concentrations, the influence of interaction always generated a number of tensile fractures parallel to the direction of loading. (C) 2002 Elsevier Ltd. All rights reserved.