Surrounding rock control of gob-side entry driving with narrow coal pillar and roadway side sealing technology in Yangliu Coal Mine

被引：44
作者：
Zha Wenhua [1 ]
Shi Hao [1 ]
Liu San [1 ]
Kang Changhao [1 ]
机构：
[1] Anhui Univ Sci & Technol, Sch Min & Safety Engn, Key Lab Safe & Effect Coal Min, Minist Educ, Huainan 232001, Peoples R China
来源：
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY | 2017年 / 27卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Narrow coal pillar; Gob-side entry driving; Surrounding rock control; Roadway side sealing technology;
D O I：
10.1016/j.ijmst.2017.07.023
中图分类号：
TD [矿业工程];
学科分类号：
0819 ;
摘要：
Gob-side entry driving can increase coal recovery ratio, and it is implied in many coal mines. Based on geological condition of 10416 working face tailentry in Yangliu Coal Mine, the surrounding rock deformation characteristics of gob-side entry driving with narrow coal pillar is analysed, reasonable size of coal pillar and reasonable roadway excavation time after mining are achieved. Surrounding rock control technology and effective roadway side sealing technology are proposed and are taken into field practice. The results showed that a safer and more efficient mining of working face can be achieved. In addition, results of this paper also have important theoretical significance and valuable reference for surrounding rock control technology of gob-side entry driving with narrow coal pillar under special geological condition. (C) 2017 Published by Elsevier B.V. on behalf of China University of Mining & Technology.
引用
收藏
页码：819 / 823
页数：5
相关论文
共 50 条
[21]   Principle and technology of surrounding rock control for gob-side entry retaining in deep mine gangue backfilling face [J].
Wang P. ;
Zeng Z. ;
Sun G. ;
Feng T. ;
Li N. ;
Liu J. ;
Li P. ;
Jiang Y. .
Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (06) :68-76
[22]   Review and development of surrounding rock control technology for gob-side entry retaining in China [J].
Zhang Z. ;
Bai J. ;
Wang X. ;
Xu Y. ;
Yan S. ;
Liu H. ;
Wu W. ;
Zhang W. .
Meitan Xuebao/Journal of the China Coal Society, 2023, 48 (11) :3979-4000
[23]   Research on bidirectional-reinforcement mechanism of narrow coal pillar of gob-side entry driving based on inflatable lock-type anchor [J].
Gu C. ;
Wang B. ;
Wang J. ;
Lu C. .
Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (04) :106-116
[24]   Field and numerical investigation on the stability of coal pillars of gob-side entry driving with top coal [J].
Zhenqian Ma ;
Chuan Chen ;
Xuchao Liang ;
Anmin Chen ;
Wenxian Song .
Arabian Journal of Geosciences, 2020, 13
[25]   Field and numerical investigation on the stability of coal pillars of gob-side entry driving with top coal [J].
Ma, Zhenqian ;
Chen, Chuan ;
Liang, Xuchao ;
Chen, Anmin ;
Song, Wenxian .
ARABIAN JOURNAL OF GEOSCIENCES, 2020, 13 (22)
[26]   Research on the safety control technology of gob-side entry in inclined thick coal seam [J].
Jia, Yongyong ;
Wang, Yulong ;
Zhuo, Risheng ;
Lou, Fang ;
Jin, Shikui ;
Zhao, Pengxiang .
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 2022, 166 :241-248
[27]   Coal Pillar Stress Weakening Technology and Application by Gob-Side Entry Driving and Hydraulic Roof Cutting in Deep Shafts Mines [J].
Zhang, Zhi ;
Ning, Jianguo ;
Wang, Jun ;
Wang, Kun ;
Yang, Shang ;
Yan, Ruyu ;
Sun, Guoqing ;
Du, Minghao .
PROCESSES, 2022, 10 (05)
[28]   Deformation and failure characteristics and control technology of surrounding rocks in deeply gob-side entry driving [J].
Cheng L. ;
Kang H. ;
Jiang P. ;
Li W. ;
Yang J. ;
Zheng Y. ;
Yi K. .
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2021, 38 (02) :227-236
[29]   Study on the pre-stressed support of the small coal pillar gob-side entry driving and the tunnel distortion [J].
Li Mingyan ;
Cao Junzhi ;
Guo Kebao .
MINE HAZARDS PREVENTION AND CONTROL TECHNOLOGY, 2007, :324-329
[30]   Structural stability of surrounding rock in shallow and thin bedrock gob-side entry driving [J].
Zhang J. ;
Liu Q. ;
Sun Y. ;
Cai W. ;
Zhang J. ;
Chen C. .
Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2020, 37 (04) :647-654
12345