Performance optimization of multi-plane light conversion (MPLC) mode multiplexer by error tolerance analysis

The linear polarized (LP) mode multiplexer based on the inverse designed multiplane light conversion (MPLC) has the advantages of low insertion loss and low mode crosstalk. However, the multiplexer also requires the fabrication and alignment accuracy in experiments, which have not been systematically analyzed. Here, we perform the error tolerance analysis of the MPLC and summarize the design rules for the LP mode multiplexer/demultiplexer. The error tolerances in the fabrication process and experimental demonstration are greatly released with proper parameters of the input/output optical beam waist, the pitch of optical beam array, and the propagation distances between the phase plane. To proof this design rule, we experimentally demonstrate the LP mode multiplexer generating LP01, LP11a, LP11b, LP21 modes and coupling to the few mode fiber, with the insertion loss lower than -5 dB. The LP modes are demultiplexed by MPLC, with the crosstalk of different mode groups lower than -10 dB. LP modes carrying 10 Gbit/s on-off keying signals transmit in a 5 km few mode fiber. The measured bit error rates (BER) curves of the LP01, LP11a, LP21 modes have the power penalties lower than 12 dB. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.