Effect of Y addition on microstructure and mechanical properties of extruded Mg-Mn alloys

被引：1
作者：
Luo, Xiaoping [1 ]
Daqing Fang [1 ]
Li Kang [1 ]
机构：
[1] Taiyuan Univ Sci & Technol, Taiyuan, Peoples R China
来源：
EMERGING MATERIALS RESEARCH | 2019年 / 8卷 / 04期
关键词：
characterisation; mechanical properties; microscopy; MAGNESIUM ALLOYS; DEFORMATION; PROGRESS;
D O I：
10.1680/jemmr.17.00056
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Two homogenized as-cast magnesium (Mg)-1 wt% manganese (Mn) alloys containing 1.0 and 4.0 wt% alloying yttrium (Y) were processed at an extrusion ratio of 17:1 at 400 degrees C using a ram speed of 0.3 mm/s. The effect of yttrium additions on the microstructure and mechanical properties of the extruded alloy was analyzed and compared. The average grain size of the extruded Mg-1Mn-4Y (MW14) alloy was much smaller than that of the extruded Mg-1Mn-1Y (MW11) alloy. In addition, the tensile strength of the MW14 alloy was higher than that of the MW11 alloy at the investigated temperature ranging form RT to 200 degrees C, although the former exhibited a lower elongation to failure. The fracture surface of the MW14 alloy exhibited the cleavage fracture mode. Conversely, a dimple was observed in the MW11 alloy which the significant differences in performance between the two alloys are attributed to their Y contents.
引用
收藏
页码：582 / 587
页数：6
相关论文
共 50 条
[41]   Microstructure and mechanical and corrosion properties of hot-extruded Mg-Zn-Ca-(Mn) biodegradable alloys [J].
Bazhenov, V. E. ;
Li, A., V ;
Komissarov, A. A. ;
Koltygin, A., V ;
Tavolzhanskii, S. A. ;
Bautin, V. A. ;
Voropaeva, O. O. ;
Mukhametshina, A. M. ;
Tokar, A. A. .
JOURNAL OF MAGNESIUM AND ALLOYS, 2021, 9 (04) :1428-1442
[42]   Effect of Zn addition on the microstructure and mechanical properties of cast, rolled and extruded Mg-6Sn-xZn alloys [J].
El Mahallawy, N. ;
Diaa, A. Ahmed ;
Akdesir, M. ;
Palkowski, H. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 :47-53
[43]   Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg-Zn-Ca-Mn alloys [J].
Bei Tang ;
Jinlong Fu ;
Jingkai Feng ;
Xiting Zhong ;
Yangyang Guo ;
Haili Wang .
International Journal of Minerals, Metallurgy and Materials, 2023, 30 :2411-2420
[44]   Effect of high Zn addition on microstructure and mechanical properties of extruded Mg-Zn-Ca-Y magnesium alloy [J].
Chen X. ;
Liu C. ;
Jiang S. ;
Wan Y. .
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2022, 53 (02) :451-460
[45]   Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg-Zn-Ca-Mn alloys [J].
Tang, Bei ;
Fu, Jinlong ;
Feng, Jingkai ;
Zhong, Xiting ;
Guo, Yangyang ;
Wang, Haili .
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2023, 30 (12) :2411-2420
[46]   Effect of strontium on the texture and mechanical properties of extruded Mg-1%Mn alloys [J].
Borkar, Hemant ;
Hoseini, Majid ;
Pekguleryuz, Mihriban .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 549 :168-175
[47]   The effect of Ca addition on microstructure and mechanical properties of extruded AZ31 alloys [J].
Song, Leipeng ;
Lu, Yalin ;
Zhang, Yang ;
Li, Xingcheng ;
Cong, Mengqi ;
Xu, Wenting .
VACUUM, 2019, 168
[48]   Effect of Y/Zn ratio on microstructure and properties of as-extruded Mg-Y-Zn alloys [J].
Liu, Baosheng ;
Yang, Jiaao ;
Wang, Zehui ;
Fang, Daqing .
MATERIALS RESEARCH EXPRESS, 2020, 7 (03)
[49]   Effects of Sn and Mn Addition on the Microstructure and Mechanical Properties of As-Extruded Mg–2Al–1Zn Alloys [J].
Fu-Hao Gao ;
Bin-Jiang Lv ;
Tie-Wei Xu ;
Ning Cui ;
Feng Guo .
Metals and Materials International, 2023, 29 :3178-3189
[50]   Effects of Al addition on microstructure and mechanical properties of Mg-Zn-Y alloys [J].
Lim, HK ;
Lee, JY ;
Kim, WT ;
Kim, DH .
MAGNESIUM TECHNOLOGY 2005, 2005, :281-283
12345