Determination and Application of Forming Limit Diagram of Aluminium Alloy 5083 Sheet

被引：0

作者：

Fang, Gang ^{[1
]}

Zhao, Jia-Qing ^{[2
]}

Wang, Qian ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Mech Engn, State Key Lab Tribol, Beijing 100084, Peoples R China

[2] Tsinghua Univ, Inst Nucl & New Energy Technol, Beijing 100084, Peoples R China

来源：

INTERNATIONAL DEEP DRAWING RESEARCH GROUP 37TH ANNUAL CONFERENCE | 2018年 / 418卷

基金：

中国国家自然科学基金;

关键词：

DIGITAL IMAGE CORRELATION; ELEVATED-TEMPERATURES;

D O I：

10.1088/1757-899X/418/1/012054

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The present research was aimed to evaluate the formability of aluminium alloy 50830-O sheet. Two-dimensional DIC method was used to measure the strain field of uniaxial tensile specimens. The flow stress equation was obtained on the base of these measured strain and stress data. The influence of virtual gauge on strain measurement was analysed. The hemispherical punch tests were conducted, where three-dimensional DIC was used to measure the strains on the forming regions of aluminium sheets. The FLD of aluminium alloy 5083-O was established using these measured strain data. The data derived from the tests were applied in FE simulations of the inner panel of a car body. Comparison between the results of the experiments and the simulations showed that the necking and fracture of the aluminium alloy component during stamping could be accurately predicted.

引用

页数：8

共 50 条

[21] ON THE PREDICTION OF THE FORMING-LIMIT DIAGRAM OF SHEET METALS
DATE, PP
PADMANABHAN, KA
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1992, 34 (05) : 363 - 374
[22] Forming limit diagram of aluminum alloy sheets
YOSHIDA K.
Keikinzoku/Journal of Japan Institute of Light Metals, 2020, 70 (10): : 490 - 496
[23] Effect of annealing on combined forming, fracture and wrinkling limit diagram of Aluminium 5086 alloy sheets
Narayanasamy R.
Satheesh J.
Sathiya Narayanan C.
International Journal of Mechanics and Materials in Design, 2008, 4 (1) : 31 - 43
[24] Numerical Investigation into the Effect of Uniaxial and Biaxial Pre-Strain on Forming Limit Diagram of 5083 Aluminum Alloy
Zhalehfar, F.
Hosseinipour, S. J.
Nourouzi, S.
Gorji, A. H.
8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011), PTS A AND B, 2011, 1383 : 165 - 172
[25] Constitutive model and forming limit prediction of AA5182-O aluminium alloy sheet in electromagnetic forming
Liu, W.
Lin, Y. Z.
Meng, Z. H.
Li, J. Q.
Huang, S. Y.
19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
[26] Forming parameters for incremental forming of aluminium alloy sheet metal
Jeswiet, J
Hagan, E
Szekeres, A
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (10) : 1367 - 1371
[27] Effect of temperature and strain rate fluctuation on forming limit curve of 5083 Al-Mg alloy sheet
Hou, Bo
Huang, Yong
Ding, Mingming
Dong, Hongji
ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (06)
[28] Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet
Jingee Park
Jeounghan Kim
Nhokwang Park
Youngsuk Kim
Metallurgical and Materials Transactions A, 2010, 41 : 97 - 105
[29] Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet
Park, Jingee
Kim, Jeounghan
Park, Nhokwang
Kim, Youngsuk
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (01): : 97 - 105
[30] FACTORS INFLUENCING THE FORMING LIMIT DIAGRAM .1. EXPERIMENTAL-DETERMINATION OF THE FORMING LIMITS OF SHEET STEEL
KLEEMOLA, HJ
KUMPULAINEN, JO
JOURNAL OF MECHANICAL WORKING TECHNOLOGY, 1980, 3 (3-4): : 289 - 302

← 1 2 3 4 5 →