Microstructure and fatigue strength of high-strength Cu-Fe and Cu-V in-situ nanocomposite wires

被引：9

作者：

Nikulin, Sergey A. ^{[1
]}

Rogachev, Stanislav O. ^{[1
]}

Rozhnov, Andrey B. ^{[1
]}

Pantsyrnyi, Viktor I. ^{[2
]}

Khlebova, Natalya E. ^{[2
]}

Nechaykina, Tatyana A. ^{[1
]}

Khatkevich, Vladimir M. ^{[1
]}

Zadorozhnyy, Mikhail Yu. ^{[1
]}

机构：

[1] Natl Univ Sci Technol MISIS, Moscow 119049, Russia

[2] Res & Prod Co Nanoelectro Co Ltd, Moscow 123060, Russia

来源：

COMPOSITES PART B-ENGINEERING | 2015年 / 70卷

关键词：

Metal-matrix composites (MMCs); Microstructures; Fatigue; Fractography; MECHANICAL-PROPERTIES; PULSED MAGNETS; COMPOSITES; DEFORMATION; NB; STEEL; CYCLE; ALLOYS; YIELD;

D O I：

10.1016/j.compositesb.2014.10.046

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The results of the quantitative analysis of the microstructure of the Cu-Fe and Cu-V in-situ nanocomposite wires with diameter of 0.44-0.80 mm by transmission electron microscopy are presented. Comparative fatigue tests of Cu-Fe and Cu-V in-situ nanocomposite wires and pure copper samples have been carried out using a dynamic mechanical analyzer (DMA). The in-situ nanocomposites have significantly higher characteristics of low-cycle fatigue failure resistance as compared to that of pure copper. The fatigue crack propagation areas for the nanocomposite conductors and pure copper are characterized by fatigue striations and secondary cracking. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：92 / 98

页数：7

共 27 条

[21] RAABE D, 1995, Z METALLKD, V86, P405
[22] Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
Raabe, Dierk
Choi, Pyuck-Pa
Li, Yujiao
Kostka, Aleksander
Sauvage, Xavier
Lecouturier, Florence
Hono, Kazuhiro
Kirchheim, Reiner
Pippan, Reinhard
Embury, David
[J]. MRS BULLETIN, 2010, 35 (12) : 982 - 991
[23] Atomic scale characterization of deformation-induced interfacial mixing in a Cu/V nanocomposite wire
Sauvage, X.
Genevois, C.
Da Costa, G.
Pantsyrny, V.
[J]. SCRIPTA MATERIALIA, 2009, 61 (06) : 660 - 663
[24] Solid state amorphization in cold drawn Cu/Nb wires
Sauvage, X
Renaud, L
Deconihout, B
Blavette, D
Ping, DH
Hono, K
[J]. ACTA MATERIALIA, 2001, 49 (03) : 389 - 394
[25] High strength, high conductivity Cu-Nb based conductors with nanoscaled microstructure
Shikov, A
Pantsyrnyi, V
Vorobieva, A
Khlebova, N
Silaev, A
[J]. PHYSICA C, 2001, 354 (1-4): : 410 - 414
[26] COMPARISON OF THE LOW-CYCLE FATIGUE PROPERTIES OF HEAVILY COLD-DRAWN COPPER AND CU-20-PERCENT-NB
SPITZIG, WA
REED, LK
CHATTERJEE, A
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1990, 123 (01): : 69 - 74
[27] FATIGUE CRACK-PROPAGATION CHARACTERISTICS AND MICROSCOPIC FRACTURE MECHANISMS IN A MILD-STEEL PLATE WITH A SMALL CIRCULAR HOLE (IN THE CASE OF EX-PLANE BENDING FATIGUE)
TAKEDA, T
KIKUCHI, S
NASU, Y
KARASHIMA, S
[J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1984, 48 (03) : 255 - 261

← 1 2 3 →