Optimization of printing conditions for microscale multiline printing in continuous roll-to-roll gravure printing

被引:29
作者
Lee, Jongsu [1 ]
Park, Janghoon [1 ]
Jeong, Hakyung [1 ]
Shin, Kee-Hyun [2 ,3 ]
Lee, Dongjin [2 ,3 ]
机构
[1] Konkuk Univ, Dept Mech Design & Prod Engn, Seoul 143701, South Korea
[2] Konkuk Univ, Sch Mech Engn, Seoul 143701, South Korea
[3] Konkuk Univ, Flexible Display Roll To Roll Res Ctr, Seoul 143701, South Korea
基金
新加坡国家研究基金会;
关键词
Printed electronics; Roll-to-roll gravure printing; Box-Behnken design of experiment; Ink transfer; Printability; RESPONSE-SURFACE METHODOLOGY; ELECTRONICS; ROUGHNESS; PATTERNS; TRANSISTORS; COMPONENTS; GUARANTEE; CONTACT; DESIGN; PLASMA;
D O I
10.1016/j.jiec.2016.07.031
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
This study proposed new criteria for numerical evaluation of the printability of microscale patterns with various printing defects. Based on these criteria, printing conditions that could be easily tuned in roll-to-roll gravure printing were optimized by a Box-Behnken design of experiment. Under the optimal conditions, sub-30-mu m multilines, which have few printing defects, were obtained. Finally, a dimensionless print quality metric was defined for an objective evaluation of printability based on the proposed criteria following verification of its viability. (C) 2016 The Korean Society of Industrial and Engineering Chemistry. Published by Elsevier B.V. All rights reserved.
引用
收藏
页码:131 / 141
页数:11
相关论文
共 40 条
[1]   Simulation of non-Newtonian ink transfer between two separating plates for gravure-offset printing [J].
Ahmed, Dewan Hasan ;
Sung, Hyung Jin ;
Kim, Dong-Soo .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2011, 32 (01) :298-307
[2]   Statistical optimization of medium components and growth conditions by response surface methodology to enhance phenol degradation by Pseudomonas putida [J].
Annadurai, Gurusamy ;
Ling, Lai Yi ;
Lee, Jiunn-Fwu .
JOURNAL OF HAZARDOUS MATERIALS, 2008, 151 (01) :171-178
[3]  
[Anonymous], 2009, SOL ENERGY MAT SOL C
[4]   Response surface methodology (RSM) as a tool for optimization in analytical chemistry [J].
Bezerra, Marcos Almeida ;
Santelli, Ricardo Erthal ;
Oliveira, Eliane Padua ;
Villar, Leonardo Silveira ;
Escaleira, Luciane Amlia .
TALANTA, 2008, 76 (05) :965-977
[5]   Nanostructure Protein Repellant Amphiphilic Copolymer Coatings with Optimized Surface Energy by Inductively Excited Low Pressure Plasma [J].
Bhatt, Sudhir ;
Pulpytel, Jerome ;
Ceccone, Giacomo ;
Lisboa, Patricia ;
Rossi, Francois ;
Kumar, Virendra ;
Arefi-Khonsari, Farzaneh .
LANGMUIR, 2011, 27 (23) :14570-14580
[6]   An investigation of the hydrodynamic and mechanical behaviour of a soft nip rolling contact [J].
Bohan, MFJ ;
Lim, CH ;
Korochkina, TV ;
Claypole, TC ;
Gethin, DT ;
Roylance, BJ .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 1997, 211 (J1) :37-49
[7]   Cell Filling in Gravure Printing for Printed Electronics [J].
Cen, Jialiang ;
Kitsomboonloha, Rungrot ;
Subramanian, Vivek .
LANGMUIR, 2014, 30 (45) :13716-13726
[8]   Profile Control of Inkjet Printed Silver Electrodes and Their Application to Organic Transistors [J].
Fukuda, Kenjiro ;
Sekine, Tomohito ;
Kumaki, Daisuke ;
Tokito, Shizuo .
ACS APPLIED MATERIALS & INTERFACES, 2013, 5 (09) :3916-3920
[9]   Non-Newtonian ink transfer in gravure-offset printing [J].
Ghadiri, Fatemeh ;
Ahmed, Dewan Hasan ;
Sung, Hyung Jin ;
Shirani, Ebrahim .
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2011, 32 (01) :308-317
[10]  
Grau G., 2015, P SOC PHOTO-OPT INS, V9569