Metallographic analysis of in-house developed marine grade aluminum alloy AA5086friction stir welds

被引：0
|
作者：
Rinu, Gollo [1 ]
Singh, Sandeep [1 ]
Mondal, Arpan Kumar [2 ]
Nirsanametla, Yadaiah [1 ]
机构：
[1] North Eastern Reg Inst Sci & Technol, Dept Mech Engn, Nirjuli 791109, Arunachal Prade, India
[2] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Kolkata 700106, W Bengal, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 62卷
关键词：
Friction stir welding; Aluminum alloy; Microstructure; Mechanical Properties; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MICROSTRUCTURE; AA5083-AA6082;
D O I：
10.1016/j.matpr.2022.04.726
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A friction stir welding (FSW) setup was developed and performed trial experiment on marine grade aluminum alloy 5086 in the present work. The input parameters were traverse speed (56 and 80 mm/min) and spindle speed (750 and 1000 rpm). From study it was observed that the spindle speed has an immense influenced on joint formation compared to feed speed. The rotational speed of 750 rpm produced defect joints due to inadequate welding heat generation and joints without defect were achieved at 1000 rpm spindle speed. The metallographic analysis and mechanical testing were conducted for the defect-free weld joints. Copyright (C) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4202 / 4206
页数：5
相关论文
共 50 条
  • [1] Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding
    Edwin Raja Dhas, J. (edwinrajadhas@rediffmail.com), 1600, Springer London (95): : 9 - 12
  • [2] Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding
    S. Shanavas
    J. Edwin Raja Dhas
    N. Murugan
    The International Journal of Advanced Manufacturing Technology, 2018, 95 : 4535 - 4546
  • [3] Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding
    Shanavas, S.
    Dhas, J. Edwin Raja
    Murugan, N.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (9-12): : 4535 - 4546
  • [4] Friction stir lap welds of AA6111 aluminum alloy
    Yadava, M.
    Mishra, R. S.
    Chen, Y. L.
    Gayden, X. Q.
    Grant, G. J.
    FRICTION STIR WELDING AND PROCESSING IV, 2007, : 203 - +
  • [5] Tensile Properties of Friction Stir Welds of AA 7020 Aluminum Alloy
    Akbar Heidarzadeh
    Reza Vatankhah Barenji
    Mohsen Esmaily
    Atabak Rahimzadeh Ilkhichi
    Transactions of the Indian Institute of Metals, 2015, 68 : 757 - 767
  • [6] Tensile Properties of Friction Stir Welds of AA 7020 Aluminum Alloy
    Heidarzadeh, Akbar
    Barenji, Reza Vatankhah
    Esmaily, Mohsen
    Ilkhichi, Atabak Rahimzadeh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2015, 68 (05) : 757 - 767
  • [7] Microstructure and mechanical properties of AA5086 aluminum alloy by friction stir welding
    Amini, K.
    Gharavi, F.
    MECHANIKA, 2016, (01): : 65 - 72
  • [8] Material Flow Behavior in Dissimilar Friction Stir Welds of AA2024 and AA5086 Aluminum Alloys
    Sharma, Chaitanya
    Tripathi, Ajay
    Verma, Vijay
    Upadhyay, Vikas
    JOURNAL OF ENGINEERING RESEARCH, 2022, 10 : 153 - 159
  • [9] The effect of offset tools on aluminum AA6351 alloy friction stir welds
    Krishna, G. Gopala
    Mahender, T.
    Reddy, Sridhara
    Rao, R. S. Umamaheshwara
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 320 - 324
  • [10] Multiscale analysis of the strength and ductility of AA 6056 aluminum friction stir welds
    Gallais, C.
    Simar, A.
    Fabregue, D.
    Denquin, A.
    Lapasset, G.
    de Meester, B.
    Brechet, Y.
    Pardoen, T.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2007, 38A (05): : 964 - 981
12345