Effect of pre-annealing on microstructure and compactibility of gas-atomized Al-Si alloy powders

被引：9

作者：

Cai, Zhi-yong ^{[1
,2
]}

Zhang, Chun ^{[1
,2
]}

Wang, Ri-chu ^{[2
]}

Peng, Chao-qun ^{[2
]}

Qiu, Ke ^{[2
]}

Wang, Nai-guang ^{[2
]}

机构：

[1] Jiangxi Univ Sci & Technol, Sch Mat Sci & Engn, Ganzhou 341000, Peoples R China

[2] Cent S Univ, Sch Mat Sci & Engn, Changsha 410083, Hunan, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2016年 / 26卷 / 09期

关键词：

Al-Si alloy; compactibility; rapid solidification; annealing; microstructure; COMPOSITE POWDERS; COLD COMPACTION; BEHAVIOR; COMPRESSIBILITY; DENSIFICATION; REINFORCEMENT; ATOMIZATION; PARTICLES; EVOLUTION;

D O I：

10.1016/S1003-6326(16)64357-1

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effect of pre-annealing treatment temperature on compactibility of gas-atomized Al-27% Si alloy powders was investigated. Microstructure and hardness of the annealed powders were characterized. Pre-annealing results in decreasing Al matrix hardness, dissolving of needle-like eutectic Si phase, precipitation and growth of supersaturated Si atoms, and spheroidisation of primary Si phase. Compactibility of the alloy powders is gradually improved with increasing the annealing temperature to 400 degrees C. However, it decreases when the temperature is above 400 degrees C owing to the existence of Si-Si phase clusters and the densely distributed Si particles. A maximum relative density of 96.1% is obtained after annealing at 400 degrees C for 4 h. In addition, the deviation of compactibility among the pre-annealed powders reaches a maximum at a pressure of 175 MPa. Therefore, a proper pre-annealing treatment can significantly enhance the cold compactibility of gas-atomized Al-Si alloy powders.

引用

页码：2355 / 2362

页数：8

共 27 条

[1] Evolutions during synthesis of Al-AlN-nanostructured composite powder by mechanical alloying [J].

Abdoli, H. ;

Salahi, E. ;

Farnoush, H. ;

Pourazrang, K. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 461 (1-2) :166-172

[2] A plastic-yield compaction model for nanostructured Al6063 alloy and Al6063/Al2O3 nanocomposite powder [J].

Asgharzadeh, H. ;

Simchi, A. ;

Kim, H. S. .

POWDER TECHNOLOGY, 2011, 211 (2-3) :215-220

[3] Non-equilibrium microstructure and thermal stability of plasma-sprayed Al-Si coatings [J].

Baik, KH ;

Seok, HK ;

Kim, HS ;

Grant, PS .

JOURNAL OF MATERIALS RESEARCH, 2005, 20 (08) :2038-2045

[4] Microstructural evolution during annealing of a rapidly solidified Al-12Si alloy [J].

Birol, Yucel .

JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 439 (1-2) :81-86

[5] Effect of inclusion morphology on the densification of powder composites [J].

Delie, F ;

Bouvard, D .

ACTA MATERIALIA, 1998, 46 (11) :3905-3913

[6] Compaction equations: a comparison of the Heckel and Kawakita equations [J].

Denny, PJ .

POWDER TECHNOLOGY, 2002, 127 (02) :162-172

[7] Effects of lubricant on green strength, compressibility and ejection of parts in die compaction process [J].

Enneti, Ravi K. ;

Lusin, Adam ;

Kumar, Sumeet ;

German, Randall M. ;

Atre, Sundar V. .

POWDER TECHNOLOGY, 2013, 233 :22-29

[8] The effects of mechanical alloying on the compressibility of aluminium matrix composite powder [J].

Fogagnolo, JB ;

Ruiz-Navas, EM ;

Robert, MH ;

Torralba, JM .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 355 (1-2) :50-55

[9] Analysis of the compaction behavior of Al-SiC nanocomposites using linear and non-linear compaction equations [J].

Hafizpour, H. R. ;

Simchi, A. ;

Parvizi, S. .

ADVANCED POWDER TECHNOLOGY, 2010, 21 (03) :273-278

[10] Analysis of the effect of reinforcement particles on the compressibility of Al-SiC composite powders using a neural network model [J].

Hafizpour, H. R. ;

Sanjari, M. ;

Simchi, A. .

MATERIALS & DESIGN, 2009, 30 (05) :1518-1523

← 1 2 3 →