Fracture behavior under torsion of notched round bars made of gray cast iron

被引：10

作者：

Berto, F. ^{[1
]}

Cendon, D. A. ^{[2
]}

Elices, M. ^{[2
]}

机构：

[1] Univ Padua, Dept Management & Engn, Stradella S Nicola 3, I-36100 Vicenza, Italy

[2] Univ Politecn Madrid, ETSI Caminos Canales & Puertos, C Prof Aranguren 3, E-28040 Madrid, Spain

来源：

THEORETICAL AND APPLIED FRACTURE MECHANICS | 2016年 / 84卷

关键词：

Torsion; Brittle failure; Notched component; Strain energy density; Gray cast iron; STRESS INTENSITY FACTOR; MODE BRITTLE-FRACTURE; SHARP V-NOTCHES; BLUNT NOTCHES; STRAIN-ENERGY; FAILURE CRITERION; ELASTIC-MATERIALS; CRACK INITIATION; U-NOTCHES; COMPONENTS;

D O I：

10.1016/j.tafmec.2016.03.001

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The purpose of this paper is twofold and therefore it has been divided in two parts. In the first part, experimental results of 25 gray cast iron notched specimens tested under torsion loading are provided. V-notch (with an opening angle of 120 degrees) geometry is considered with root radii ranging from 0.1 to 2.0 mm. Plots of torque loads versus twist angles are recorded for all notch root radii tested. Such results can help in evaluating numerical and theoretical models for fracture of notched components under mode III loading. The second part of the paper deals with an analysis of the experimental results by using the Strain Energy Density criterion. Because of the mode III loading conditions, a non-conventional application of such criterion is carried out, showing a good agreement between the experimental results and the theoretical fracture assessments and it is used to justify the link between nominal and local fracture approaches. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：157 / 165

页数：9

共 62 条

[11] Fracture assessment of U-notches under mixed mode loading:: two procedures based on the 'equivalent local mode I' concept [J].

Berto, F. ;

Lazzarin, P. ;

Gomez, F. J. ;

Elices, M. .

INTERNATIONAL JOURNAL OF FRACTURE, 2007, 148 (04) :415-433

[12] J-integral evaluation for U- and V-blunt notches under Mode I loading and materials obeying a power hardening law [J].

Berto, F. ;

Lazzarin, P. ;

Matvienko, Yu. G. .

INTERNATIONAL JOURNAL OF FRACTURE, 2007, 146 (1-2) :33-51

[13] Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches [J].

Berto, F. ;

Lazzarin, P. .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2014, 75 :1-48

[14] Fracture behaviour of notched round bars made of PMMA subjected to torsion at-60 °C [J].

Berto, F. ;

Cendon, D. A. ;

Lazzarin, P. ;

Elices, M. .

ENGINEERING FRACTURE MECHANICS, 2013, 102 :271-287

[15] Fracture behaviour of notched round bars made of PMMA subjected to torsion at room temperature [J].

Berto, F. ;

Elices, M. ;

Lazzarin, P. ;

Zappalorto, M. .

ENGINEERING FRACTURE MECHANICS, 2012, 90 :143-160

[16] Fictitious notch rounding concept applied to V-notches with root holes subjected to in-plane shear loading [J].

Berto, F. ;

Lazzarin, P. ;

Radaj, D. .

ENGINEERING FRACTURE MECHANICS, 2012, 79 :281-294

[17] A review of the volume-based strain energy density approach applied to V-notches and welded structures [J].

Berto, F. ;

Lazzarin, P. .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2009, 52 (03) :183-194

[18] Fictitious notch rounding concept applied to sharp V-notches: Evaluation of the microstructural support factor for different failure hypotheses Part II: Microstructural support analysis [J].

Berto, F. ;

Lazzarin, P. ;

Radaj, D. .

ENGINEERING FRACTURE MECHANICS, 2009, 76 (09) :1151-1175

[19] Geometrical effects on lamellar grey cast iron fracture toughness [J].

Bertolino, Graciela ;

Perez-Ipina, Juan E. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 179 (1-3) :202-206

[20] A phenomenological framework of constitutive modelling for incompressible and compressible elasto-plastic solids [J].

Chen, C ;

Lu, TJ .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2000, 37 (52) :7769-7786

← 1 2 3 4 5 6 7 →