Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Mn-Ce Composites Synthesized by Polymer-Assisted Deposition

The MnxCey binary catalysts with a three-dimensional network structure were successfully prepared via a polymer-assisted deposition method using ethylenediaminetetraacetic acid and polyethyleneimine as complexing agents. The developed pore structure could facilitate the gas diffusion and accelerate the catalytic reaction for NH3 selective catalytic reduction (SCR). Moreover, the addition of Ce is beneficial for the exposure of active sites on the catalyst surface and increases the adsorption of the NH3 and NO species. Therefore, the Mn1Ce1 catalyst exhibits the best catalytic activity for NOx removal with a conversion rate of 97% at 180 degrees C, superior water resistance, and favorable stability. The SCR reaction over the Mn1Ce1 catalyst takes place through the E-R pathway, which is confirmed by the in situ diffuse reflectance Fourier transform analysis. This work explores a new strategy to fabricate multimetal catalysts and optimize the structure of catalysts.