EFFECT OF FILM COOLING HOLES SHAPE OF HELIUM TURBINE BLADES IN HTGR

被引：0
|
作者：
Sun, Xiaokai [1 ]
Peng, Wei [1 ]
机构：
[1] Tsinghua Univ, Inst Nucl & New Energy Technol, Collaborat Innovat Ctr Adv Nucl Energy Technol, Key Lab Adv Reactor Engn & Safety,Minist Educ, Beijing 100084, Peoples R China
来源：
PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 3 | 2016年
关键词：
DENSITY;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The effect of holes shape on film cooling was investigated numerically in the present study. Three cases of holes which are sister holes located in the downstream (case 1), upstream (case 2) and side (case 3) were studied when keeping the flow area and flow rate constant. Cylindrical hole was also investigated to make a comparison. The results showed film cooling effectiveness is higher at the blowing ratio M=0.5 for cylindrical hole; while for the hole with sister holes, film cooling performance is better at corresponding blowing ratio M=1.0 and it is better than that of the cylindrical hole. The reason is that the interaction between the mainstream and the cooling stream produces the counter-rotating vortex pairs (CVP) at high blowing ratio, which will make the hot mainstream underneath the cooling stream and lifts the cooling stream from the surface for the cylindrical hole. And the three cases of holes with sister holes can weaken the effect of the CVP.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] EFFECT OF INTERNAL CROSSFLOW ON DOUBLE JET FILM COOLING HOLES OF HELIUM TURBINE BLADES
    Sun, Xiao-kai
    Peng, Wei
    Wang, Jie
    Jiang, Pei-xue
    PROCEEDINGS OF THE 25TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2017, VOL 6, 2017,
  • [2] Effects of film cooling holes on vibration characteristics of aeroengine turbine blades
    An, Bo
    Wu, Junnan
    INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2023, 14 (05) : 700 - 708
  • [3] Discharge Coefficient of Expanded Exit Holes for Film Cooling of Turbine Blades
    Forghan, Fariborz
    Narusawa, Uichiro
    Metghalchi, Hameed
    JOURNAL OF PROPULSION AND POWER, 2010, 26 (06) : 1322 - 1325
  • [4] Adaptive positioning technology of film cooling holes in hollow turbine blades
    Huang, Wangwang
    Mei, Xuesong
    Fan, Zhengjie
    Wang, Wenjun
    Jiang, Gedong
    Zhang, Jinyu
    Wang, Yuyan
    AEROSPACE SCIENCE AND TECHNOLOGY, 2024, 145
  • [5] Adaptive positioning technology of film cooling holes in hollow turbine blades
    Huang, Wangwang
    Mei, Xuesong
    Fan, Zhengjie
    Wang, Wenjun
    Jiang, Gedong
    Zhang, Jinyu
    Wang, Yuyan
    Aerospace Science and Technology, 2024, 145
  • [6] FILM COOLING OF TURBINE-BLADES BY INJECTION FROM A ROW OF HOLES
    HAAS, W
    RODI, W
    SCHONUNG, B
    ZEITSCHRIFT FUR FLUGWISSENSCHAFTEN UND WELTRAUMFORSCHUNG, 1988, 12 (03): : 159 - 172
  • [7] Numerical Analysis of Film Cooling of Gas Turbine Blades using Shaped Holes
    Seralathan S.
    Reddy K.B.
    Hemanthkumar K.
    Sujith D.S.
    Hariram V.
    Premkumar T.M.
    International Journal of Vehicle Structures and Systems, 2021, 13 (05) : 541 - 547
  • [8] Cooling air holes and coatings of turbine blades
    Beck, Thomas
    Ladru, Frank
    VDI Berichte, 2008, (2051): : 107 - 117
  • [9] Cooling and Capability Analysis Methodology: Towards Development of a Cost Model for Turbine Blades Film Cooling Holes
    Continente, Javier
    Shehab, Essam
    Salonitis, Konstantinos
    Tammineni, Sree
    Chinchapatnam, Phani
    TRANSDISCIPLINARY LIFECYCLE ANALYSIS OF SYSTEMS, 2015, 2 : 386 - 395
  • [10] Geometric and Flow Characterization of Additively Manufactured Turbine Blades With Drilled Film Cooling Holes
    Mccormack, Kelsey E.
    Rozman, Maria
    Berdanier, Reid A.
    Thole, Karen A.
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2025, 147 (04):
12345