Vegetation mapping with the aid of low-altitude aerial photography

. A technique for fine-scale vegetation mapping with the aid of low-altitude aerial photography was developed. The procedure is as follows: 1. The site is divided into a lattice pattern - in case the site is too large to fit into a single photograph with satisfactory resolution. The coordinates of every lattice point are surveyed to be used as control points for geometric correction. A photograph of each block of the lattice is taken using a remote-controlled camera system lifted by a captive helium balloon. 2. The vegetation is classified on the basis of a phytosociological survey. 3. The shapes and locations of vegetation patches appearing in the photographs are entered into a computer, using a digitizer. A geometric correction is carried out through coordinate transformation referring to the coordinates of the control points and subsequently a draft vegetation map is produced. Finally, discrepancies are corrected and the map is coloured to produce the final version of the vegetation map. This technique was applied to vegetation mapping at a bar, 500 m wide and 2 km long, in the river Yoshino in Shikoku, Japan. A fine-scale vegetation map was obtained and used to analyse the influence of plants on geomorphic processes and community-specific hydrogeomorphic conditions on the bar.