Calcium and zirconium as texture modifiers during rolling and annealing of magnesium-zinc alloys

被引：90

作者：

Bohlen, Jan ^{[1
]}

Wendt, Joachim ^{[1
]}

Nienaber, Maria ^{[1
]}

Kainer, Karl Ulrich ^{[1
]}

Stutz, Lennart ^{[1
]}

Letzig, Dietmar ^{[1
]}

机构：

[1] Helmholtz Zentrum Geesthacht, Magnesium Innovat Ctr, D-21502 Geesthacht, Germany

来源：

MATERIALS CHARACTERIZATION | 2015年 / 101卷

关键词：

Magnesium alloys; Sheet rolling; Microstructure; Texture; Recrystallisation; X-ray diffraction; Electron backscatter diffraction (EBSD); MG-Y ALLOYS; DYNAMIC RECRYSTALLIZATION; GRAIN-SIZE; DEFORMATION; TEMPERATURE; BEHAVIOR; SOLUTE; SHEET; 1ST-PRINCIPLES; FORMABILITY;

D O I：

10.1016/j.matchar.2015.02.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Rolling experiments were carried out on a ternary Mg-Zn-Ca alloy and its modification with zirconium. Short time annealing of as-rolled sheets is used to reveal the microstructure and texture development. The texture of the as-rolled sheets can be characterised by basal pole figures with split peak towards the rolling direction (RD) and a broad transverse angular spread of basal planes towards the transverse direction (TD). During annealing the RD split peaks as well as orientations in the sheet plane vanish whereas the distribution of orientations tilted towards the TD remains. It is shown in EBSD measurements that during rolling bands of twin containing structures form. During subsequent annealing basal orientations close to the sheet plane vanish based on a grain nucleation and growth mechanism of recrystallisation. Orientations with tilt towards the TD remain in grains that do not undergo such a mechanism. The addition of Zr delays texture weakening. (C) 2015 Elsevier Inc. All rights reserved.

引用

页码：144 / 152

页数：9

共 33 条

[21] DYNAMIC RECRYSTALLIZATION AND THE DEVELOPMENT OF MICROSTRUCTURE DURING THE HIGH-TEMPERATURE DEFORMATION OF MAGNESIUM
ION, SE
HUMPHREYS, FJ
WHITE, SH
[J]. ACTA METALLURGICA, 1982, 30 (10): : 1909 - 1919
[22] Kim D.W., 2013, METALL MATER TRANS A, P2950
[23] Kree V, 2004, PRAKT METALLOGR-PR M, V41, P233
[24] Comparison of static recrystallization behavior in hot rolled Mg-3Al-1Zn and Mg-3Zn-0.5Ca sheets
Lee, Jong-Youn
Yun, Young-Su
Suh, Byeong-Chan
Kim, Nack-Joon
Kim, Won-Tae
Kim, Do-Hyang
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 589 : 240 - 246
[25] The recrystallization and texture of magnesium-zinc-cerium alloys
Mackenzie, L. W. F.
Pekguleryuz, M. O.
[J]. SCRIPTA MATERIALIA, 2008, 59 (06) : 665 - 668
[26] Periodic Segregation of Solute Atoms in Fully Coherent Twin Boundaries
Nie, J. F.
Zhu, Y. M.
Liu, J. Z.
Fang, X. Y.
[J]. SCIENCE, 2013, 340 (6135) : 957 - 960
[27] On the role of non-basal deformation mechanisms for the ductility of Mg and Mg-Y alloys
Sandloebes, S.
Zaefferer, S.
Schestakow, I.
Yi, S.
Gonzalez-Martinez, R.
[J]. ACTA MATERIALIA, 2011, 59 (02) : 429 - 439
[28] Senn J.W., 2006, PROC MAGNESIUM TECHN, P115
[29] The origin of "rare earth" texture development in extruded Mg-based alloys and its effect on tensile ductility
Stanford, N.
Barnett, M. R.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2): : 399 - 408
[30] The effect of rare earth elements on the behaviour of magnesium-based alloys: Part 2-recrystallisation and texture development
Stanford, N.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 565 : 469 - 475

← 1 2 3 4 →