Correlation of Mechanical Properties with Diameter and Cooling Rate of 1080 Wire-Rod

被引：5

作者：

Kohli, A. ^{[1
]}

Poirier, D. R. ^{[1
]}

机构：

[1] Univ Arizona, Dept Mat Sci & Engn, Tucson, AZ 85721 USA

来源：

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2017年 / 26卷 / 12期

关键词：

pearlite transformation; steel; wire-rod; PEARLITIC STEEL WIRES; HIGH-CARBON STEEL; STRENGTH;

D O I：

10.1007/s11665-017-3079-7

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

More than 540 heats of 1080 wire-rod were statistically analyzed by regression analyses to see whether tensile strength and percent reduction in area (%RA) relate to wire-rod diameter and composition. As diameter increases from 5.6 to 12.7 mm, the trend in %RA shows a decrease with negligible effect on the trend of the tensile strength. It was found that the estimated cooling rate at 700 A degrees C during controlled cooling is responsible for the "diameter effect." The effect of composition on %RA is minor when contrasted to the "diameter effect." In particular, the effect of the concentrations of the residual elements on %RA within the compositional range studied is negligible.

引用

页码：5871 / 5876

页数：6

共 50 条

[41] Influence of cooling rate on the microstructure and room temperature mechanical properties in the refractory AlMo0.5NbTa0.5TiZr superalloy
Ocano, Patricia Suarez
Manzoni, Anna
Lopez-Galilea, Inmaculada
Ruttert, Benjamin
Laplanche, Guillaume
Jacome, Leonardo Agudo
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 949
[42] Influence of cooling rate during cryogenic treatment on the hierarchical microstructure and mechanical properties of M54 secondary hardening steel
Zhang, Honglin
Zhang, Guangqian
Zhou, Haichong
Liu, Zhaohui
Xu, Bin
Hao, Luhan
Sun, Mingyue
Li, Dianzhong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 851
[43] Cooling Rate and Compositional Effects on Microstructural Evolution and Mechanical Properties of (CoCrCuTi)100-xFex High-Entropy Alloys
Terry, Brittney
Abbaschian, Reza
ENTROPY, 2024, 26 (10)
[44] Influence of cooling rate and pressure on the structural and mechanical properties of iron monatomic metallic glasses: Insights from molecular dynamics simulations
Assouli, Soufiane
El Hafi, Tarik
El Kharraz, Abdelaziz
Bajjou, Omar
Lachtioui, Youssef
SOLID STATE COMMUNICATIONS, 2025, 399
[45] Correlation between strain-rate-related mechanical properties of Zr-based metallic glass and casting temperature
Xue, Yunfei
Wang, Lu
Cheng, Xingwang
Wang, Fuchi
Cai, Hongnian
Cheng, Huanwu
Zhang, Haifeng
Wang, Aiming
JOURNAL OF MATERIALS RESEARCH, 2012, 27 (04) : 701 - 708
[46] Numerical - Experimental correlation of microstructures, cooling rates and mechanical properties of AISI 1045 steel during the Jominy end-quench test
Nunura, Cesar R. N.
dos Santos, Carlos A.
Spim, Jaime A.
MATERIALS & DESIGN, 2015, 76 : 230 - 243
[47] Correlation between reversed austenite and mechanical properties in a low Ni steel treated by ultra-fast cooling, intercritical quenching and tempering
Chen, Qi-Yuan
Ren, Jia-Kuan
Xie, Zhang-Long
Zhang, Wei-Na
Chen, Jun
Liu, Zhen-Yu
JOURNAL OF MATERIALS SCIENCE, 2020, 55 (04) : 1840 - 1853
[48] Effect of deformation ratio and cooling rate on mechanical properties and microstructure of 0.08wt% C HSLA steel microalloyed with Nb and Mo
Almosilhy, Almosilhy Mohammed
Farahat, Ahmed Ismail Zaky
El-Bitar, Taher Ahmed
Hegazy, Ahmed Abousree
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2010, : 599 - 608
[49] Investigating the effects of short time austenitizing and cooling rate on pearlitic microstructure and mechanical properties of a hot rolled plain eutectoid carbon steel
Rastegari, H.
Kermanpur, A.
Najafizadeh, A.
MATERIALS & DESIGN, 2015, 67 : 217 - 223
[50] Effect of cooling rate on the order degree, residual stress, and room temperature mechanical properties of Fe-6.5wt.%Si alloy
Xuan, Dongpo
Zhou, Cheng
Zhou, You
Jiang, Tianliang
Fan, Wenhao
Mao, Yi
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2023, 571

← 1 2 3 4 5 →