Adsorption, Equilibrium Isotherm, and Thermodynamic Studies towards the Removal of Reactive Orange 16 Dye Using Cu(I)-Polyaninile Composite

To overcome some of the limitations of activated carbon like efficiency, cost-effectiveness, and reusability, the present work deals with Cu(I)-based polyaniline (PANI) composite for the removal of reactive orange 16 (RO16) dye. Following the synthesis and characterization of formed Cu(I)-PANI composite, the batch experiments performed for the removal of RO16 dye indicated that the composite has the capacity to reduce the coloring from RO16. The experiments were conducted for the study of effects against changes in pH, time, and dose at room temperature, where we observed for a pH impact on the dye adsorption capacity in the range of 2-12. Among all, the optimal RO16 removal was found to be 94.77% at a pH of 4 and in addition, the adsorption kinetics confirmed to be pseudo-second-order with more suitability towards the Langmuir isotherm, where it is presumed to be the formation of a monolayer of dye molecule at the homogeneous absorbent surface. The calculated maximum capacity, q(m), determined from the Langmuir model was 392.156 mg/g. Further application of isotherms to attain thermodynamic parameters, a slight positive value of Delta S degrees for RO16 adsorption was observed, meaning that there is an increased randomness in the irregular pattern at the specific Cu(I)-PANI interface for an adsorption process. This mechanism plays an essential role in maintaining the effects of water pollution; and, based on the analysis therefore, it is prominent that the Cu(I)-PANI composite can be employed as a promising and economical adsorbent for the treatment of RO16 and other dye molecules from the sewage in wastewater.