Morphology, thermal, and dynamic mechanical properties of poly(lactic acid)/sisal whisker nanocomposites

Sisal whiskers were used as biobased nanofillers to prepare poly(lactic acid) (PLA)-based nanocomposites. The whiskers were prepared from sisal fibers via sulfuric acid hydrolysis. Freeze drying of the aqueous whisker suspension was carried out to obtain loosely packed dry sisal whiskers. The nanocomposites were prepared by melt mixing, followed by hot melt pressing. The effect of the freeze drying of the nanofibers, the treatments of the samples with maleic anhydride (MA)/dicumyl peroxide (DCP) and with DCP, and the premixing of the powdered components on the dispersion of the whiskers in the PLA matrix and on the morphology, as well as the thermal and dynamic mechanical properties, of the resultant nanocomposites were investigated. Transmission electron microscopy micrographs show that the acid hydrolysis has led to separation of the whiskers, which had an approximate length and diameter of 195 and 15 nm, respectively. The TEM images of the nanocomposites show similar dispersion of the whiskers in the PLA matrix, whether untreated or MA/DCP or DCP treated. It was found that the crystallization behavior of the PLA matrix changed somewhat depending on whether the samples were treated or not. The thermogravimetric analysis results show a slight decrease in the thermal stabilities of the untreated and the MA/DCP-treated nanocomposite samples compared to that of the neat PLA, whereas the DCP treatment slightly improved the thermal stability of the nanocomposites. The storage modulus of the nanocomposites increased over the investigated temperature region, and the incorporation of sisal whiskers reduced the intensity of the glass transition at 67 degrees C. POLYM. COMPOS., 2012. (C) 2012 Society of Plastics Engineers