Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - A review

被引：499

作者：

Pramanik, A. ^{[1
]}

Basak, A. K. ^{[2
]}

Dong, Y. ^{[1
]}

Sarker, P. K. ^{[3
]}

Uddin, M. S. ^{[4
]}

Littlefair, G. ^{[5
]}

Dixit, A. R. ^{[6
]}

Chattopadhyaya, S. ^{[6
]}

机构：

[1] Curtin Univ, Dept Mech Engn, Bentley, WA, Australia

[2] Univ Adelaide, Adelaide Microscopy, Adelaide, SA, Australia

[3] Curtin Univ, Dept Civil Engn, Bentley, WA, Australia

[4] Univ South Australia, Sch Engn, Mawson Lakes, SA 5095, Australia

[5] Auckland Univ Technol, Fac Design & Creat Technol, Auckland, New Zealand

[6] Indian Sch Mines, Dept Mech Engn, Dhanbad 826004, Jharkhand, India

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2017年 / 101卷

关键词：

carbon fibre reinforced polymer (CFRP); composites; Aluminium alloys; Joining; SINGLE-LAP JOINTS; THERMAL RESIDUAL-STRESSES; HOLE-CLINCHING PROCESS; HIGH-STRENGTH STEEL; FAILURE BEHAVIOR; POLY(PHENYLENE SULFIDE); SURFACE-TREATMENT; ADHESIVE JOINTS; BOLTED JOINTS; MECHANICAL PERFORMANCE;

D O I：

10.1016/j.compositesa.2017.06.007

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper investigates comprehensive knowledge regarding joining CFRP and aluminium alloys in available literature in terms of available methods, bonding processing and mechanism and properties. The methods employed comprise the use of adhesive, self-piercing rivet, bolt, clinching and welding to join only CFRP and aluminium alloys. The non-thermal joining methods received great attention though the welding process has high potential in joining these materials. Except adhesive bonding and welding, other joining methods require the penetration of metallic pins through joining parts and therefore, surface preparation is unimportant. No model is found to predict the properties of jointed structures, which makes it difficult to select one over another in applications. The choice of bonding methods depends primarily on the specific applications. The load-bearing mechanism of bolted joints is predominantly the friction that is the first stage resistance. Hybrid joints performance is enhanced by combining rivets, clinch or bolts with adhesives. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：1 / 29

页数：29

共 171 条

[1] Joining of high strength steel and aluminium alloy sheets by mechanical clinching with dies for control of metal flow [J].