Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique

In this study, low cost ceramic supports were prepared from kaolin via phase inversion technique with two kaolin particle sizes, which are 0.04-0.6 mu m (denoted as type A) and 10-15 mu m (denoted as type B), at different kaolin contents ranging from 14 to 39 wt.%, sintered at 1200 degrees C. The effect of kaolin particle sizes as well as kaolin contents on membrane structure, pore size distribution, porosity, mechanical strength, surface roughness and gas permeation of the support were investigated. The support was prepared using kaolin type A induced asymmetric structure by combining macroporous voids and sponge-like structure in the support with pore size of 0.38 mu m and 1.05 mu m, respectively, and exhibited ideal porosity (27.7%), great mechanical strength (98.9 MPa) and excellent gas permeation. Preliminary study shows that the kaolin ceramic support in this work is potential to gas separation application at lower cost. (C) 2016 The Ceramic Society of Japan and the Korean Ceramic Society. Production and hosting by Elsevier B.V.