The effects of combination of severe plastic deformation and Shot Peening surface treatment on fatigue behavior of 6082 aluminum alloy

被引：7
作者：
Mohammadi, S. [1 ]
Irani, M. [2 ]
Taheri, A. Karimi [1 ]
机构：
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
[2] Golpayegan Univ Technol, Dept Mat Sci & Engn, Golpayegan, Iran
来源：
RUSSIAN JOURNAL OF NON-FERROUS METALS | 2015年 / 56卷 / 02期
关键词：
ECAP; shot peening; fatigue; A16082; alloy; ultra-fine grain; MECHANICAL ATTRITION TREATMENT; AL-ALLOY; GRAIN-REFINEMENT; RESIDUAL-STRESS; ULTRA-FINE; PURE TI; MICROSTRUCTURE; ECAP; PREDICTION; EVOLUTION;
D O I：
10.3103/S1067821215020133
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this paper, the effects of Equal Channel Angular Pressing process (ECAP) followed by Shot Peening process (SP) on the fatigue properties of 6082 aluminum alloy are investigated. Several samples of the alloy are ECAPed and SPed and then their mechanical behavior are characterized using tensile, micro-hardness, and fatigue tests. The results indicate that shot peening and then polishing the specimen after one-pass ECAP is an effective method to improve the fatigue life of the alloy. Moreover, by increasing the number of ECAP passes before shot peening, a local work softening occurs at the subsurface layer, leading to a significant decrease in the fatigue life of the alloy. The results of the fractography studies show that the nucleation of fatigue crack moves from the surface of the specimen to the subsurface in the specimens ECAPed more than one pass and then SPed.
引用
收藏
页码：206 / 211
页数：6
相关论文
共 31 条
[1]   Effect of surface mechanical attrition treatment (SMAT) on microhardness, surface roughness and wettability of AISI 316L [J].
Arifvianto, B. ;
Suyitno ;
Mahardika, M. ;
Dewo, P. ;
Iswanto, P. T. ;
Salim, U. A. .
MATERIALS CHEMISTRY AND PHYSICS, 2011, 125 (03) :418-426
[2]   On the shot peening surface coverage and its assessment by means of finite element simulation: A critical review and some original developments [J].
Bagherifard, Sara ;
Ghelichi, Ramin ;
Guagliano, Mario .
APPLIED SURFACE SCIENCE, 2012, 259 :186-194
[3]   Numerical and experimental analysis of surface roughness generated by shot peening [J].
Bagherifard, Sara ;
Ghelichi, Ramin ;
Guagliano, Mario .
APPLIED SURFACE SCIENCE, 2012, 258 (18) :6831-6840
[4]   High Strength AA7050 Al alloy processed by ECAP: Microstructure and mechanical properties [J].
Cardoso, K. R. ;
Travessa, D. N. ;
Botta, W. J. ;
Jorge, A. M., Jr. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18) :5804-5811
[5]   Fatigue properties and crack behavior of ultra-fine and nanocrystalline pure metals [J].
Cavaliere, P. .
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (10) :1476-1489
[6]  
Chul Lee Y.S., 2003, METALL MATER TRANS A, V34, P625
[7]  
Dadbakhsh S., MAT SCI ENG A, V527, P4758
[8]   Analysis of fatigue resistance improvements via surface severe plastic deformation [J].
Dai, K. ;
Shaw, L. .
INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (08) :1398-1408
[9]   Effects of grain size on the properties of a low nickel austenitic stainless steel [J].
Di Schino, A ;
Barteri, M ;
Kenny, JM .
JOURNAL OF MATERIALS SCIENCE, 2003, 38 (23) :4725-4733
[10]   Grain size dependence of the fatigue behaviour of a ultrafine-grained AISI 304 stainless steel [J].
Di Schino, A ;
Kenny, JM .
MATERIALS LETTERS, 2003, 57 (21) :3182-3185
1234