Warpage Minimization on Nylon Side Arm Using Response Surface Methodology (RSM): An Analysis

被引：0
|
作者：
Sow, C. K. [1 ]
Fathullah, M. [1 ,2 ]
Shayfull, Z. [1 ,2 ]
Nasir, S. M. [2 ,3 ]
Shazzuan, S. [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Mfg Engn, Kampus Tetap Pauh Putra, Arau 02600, Perlis, Malaysia
[2] Univ Malaysia Perlis, Green Design & Mfg Res Grp, Ctr Excellence Geopolymer & Green Technol CEGeoGT, Kangar 0100, Perlis, Malaysia
[3] Univ Malaysia Perlis, Ctr Diploma Studies, Kangar 0100, Perlis, Malaysia
来源：
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) | 2017年 / 1885卷
关键词：
D O I：
10.1063/1.5002337
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This research is all about injection moulding process in determination of the optimum processing parameters used for manufacturing side arms of catheters in minimizing the warpage issues. The optimization method used was the RSM. Moreover, in this research tries to find the most significant factor affecting the warpage. From the literature review, 5 most significant parameters on warpage defect was selected. Those parameters were melt temperature, packing time, packing pressure, mould temperature melt temperature. At the beginning, side arm was drawn using software of CATIA V5. Then, software Mouldflow and Design Expert were employed to analyses on the popular warpage issues. Recommended parameter settings from the simulation work were then comparing with the optimization work of RSM. The result show that the warpage on the side arm was improved by 5.46 %
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Minimising Warpage on Side Arm Using Response Surface Methodology (RSM)
    Ain, N.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [2] Analyzing Parameters Optimisation in Minimising Warpage on Side Arm using Response Surface Methodology (RSM)
    Rayhana, N.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [3] Application of Response Surface Methodology (RSM) and Genetic Algorithm in Minimizing Warpage on Side Arm
    Raimee, N. A.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [4] Warpage Minimization: Analysis using Response Surface Methodology (RSM) and Particle Swarm Optimization (PSO) on Thin Part
    Yasiin, A.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    Sazli, M.
    Yahya, Z. R.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [5] Warpage Minimization On Wheel Caster By Optimizing Process Parameters Using Response Surface Methodology (RSM)
    Safuan, N. S.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [6] Optimisation on Processing Parameters for Minimising Warpage on Side Arm using Response Surface Methodology (RSM) and Particle Swarm Optimisation (PSO)
    Rayhana, N.
    Fathullah, M.
    Shayfull, Z.
    Nasir, S. M.
    Hazwan, M. H. M.
    Sazli, M.
    Yahya, Z. R.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [7] Warpage Analysis on Thin Shell Part using Response Surface Methodology (RSM)
    Arulmullai, R.
    Nasir, S. M.
    Fathullah, M.
    Rashidi, M. M.
    Noriman, N. Z.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
  • [8] Warpage Analysis on Thin Shell Part using Response Surface Methodology (RSM)
    Zulhasif, Z.
    Shayfull, Z.
    Nasir, S. M.
    Fathullah, M.
    Hazwan, M. H. M.
    3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017), 2017, 1885
  • [9] Optimization of Warpage on Plastic Part by Using Response Surface Methodology (RSM)
    Nabila, W. P. N.
    Nasir, S. M.
    Fathullah, M.
    Shuaib, N. A.
    Irfan, A. R.
    5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
  • [10] Optimization of Warpage on Plastic Part by Using Response Surface Methodology (RSM)
    Hidayah, M. H. N.
    Shayfull, Z.
    Noriman, N. Z.
    Fathullah, M.
    Norshahira, R.
    Miza, A. T. N. A.
    GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS, 2018, 2030
12345