Characterization and electrical properties of a novel Sn0.9Cu0.1P2O7/KPO3 composite electrolyte for intermediate temperature solid oxide fuel cells

被引:1
作者
Zhang, Li [1 ]
Chen, Wei [1 ]
Hu, Wenli [1 ]
机构
[1] Fuyang Presch Educ Coll, Fuyang 236015, Peoples R China
关键词
Pyrophosphate; Composite; Electrolyte; Conductivity; Fuel cell; IONIC-CONDUCTION; PROTON CONDUCTION; CATHODE; PERFORMANCE; ANODE;
D O I
10.20964/2020.05.04
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
In this study, 10 mol% Cu2+-doped SnP2O7 was compounded with K2CO3 to prepare Sn0.9Cu0.1P2O7/KPO3 composite electrolyte. The structure, morphology and medium temperature electrical properties of Sn0.9Cu0.1P2O7/KPO3 were investigated. The Raman spectrometer result showed that Sn0.9Cu0.1P2O7/KPO3 was composed of pyrophosphate and metaphosphate groups. The maximum conductivity of Sn0.9Cu0.1P2O7/KPO3 reached 6.6 x10(-2) S.cm(-1) at 700 degrees C. The maximum power density of Sn0.9Cu0.1P2O7/KPO3 reached to 131 mW.cm(-2) at 700 degrees C.
引用
收藏
页码:4447 / 4453
页数:7
相关论文
共 30 条
[1]   Effect of Cation Ordering on the Performance and Chemical Stability of Layered Double Perovskite Cathodes [J].
Bernuy-Lopez, Carlos ;
Rioja-Monllor, Laura ;
Nakamura, Takashi ;
Ricote, Sandrine ;
O'Hayre, Ryan ;
Amezawa, Koji ;
Einarsrud, Mari-Ann ;
Grande, Tor .
MATERIALS, 2018, 11 (02)
[2]   Tailoring the Cathode-Electrolyte Interface with Nanoparticles for Boosting the Solid Oxide Fuel Cell Performance of Chemically Stable Proton-Conducting Electrolytes [J].
Bi, Lei ;
Shafi, Shahid P. ;
Da'as, Eman Husni ;
Traversa, Enrico .
SMALL, 2018, 14 (32)
[3]  
Bingham P. A., 2018, MAT RES B, V43, P1679
[4]   Influence of PTFE on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell [J].
Chen, Yanan ;
Tian, Tian ;
Wan, Zhaohui ;
Wu, Fan ;
Tan, Jinting ;
Pan, Mu .
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (04) :3827-3842
[5]   Nanostructuring the electronic conducting La0.8Sr0.2MnO3-δ cathode for high-performance in proton-conducting solid oxide fuel cells below 600°C [J].
Da'as, Eman Husni ;
Bi, Lei ;
Boulfrad, Samir ;
Traversa, Enrico .
SCIENCE CHINA-MATERIALS, 2018, 61 (01) :57-64
[6]   Optimization of sintering temperature for SOFCs by a co-firing method [J].
Dai, Hailu ;
Kou, Hongning ;
Tao, Zetian ;
Liu, Kailu ;
Xue, Min ;
Zhang, Qinfang ;
Bi, Lei .
CERAMICS INTERNATIONAL, 2020, 46 (05) :6987-6990
[7]   Proton Conductivity and Solid Acidity of Mg-, In-, and Al-Doped SnP2O7 [J].
Genzaki, Kouji ;
Heo, Pilwon ;
Sano, Mitsuru ;
Hibino, Takashi .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2009, 156 (07) :B806-B810
[8]   Barium- and Strontium-Containing Anode Materials toward Ceria-Based Solid Oxide Fuel Cells with High Open Circuit Voltages [J].
Gong, Zheng ;
Sun, Wenping ;
Jin, Zongzi ;
Miao, Lina ;
Liu, Wei .
ACS APPLIED ENERGY MATERIALS, 2018, 1 (07) :3521-3528
[9]   A novel Sn0.9Ni0.1P2O7/KPO3 composite electrolyte with improved electrical properties for intermediate temperature fuel cells [J].
Guan, Qingmei ;
Hu, Tianhui ;
Wang, Hongtao ;
Xi, Guangcheng .
CERAMICS INTERNATIONAL, 2020, 46 (08) :11602-11605
[10]   An Intermediate-Temperature Biomass Fuel Cell UsingWood Sawdust and Pulp Directly as Fuel [J].
Hibino, Takashi ;
Kobayashi, Kazuyo ;
Lv, Peiling ;
Nagao, Masahiro ;
Teranishi, Shinya ;
Mori, Toshiyuki .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2017, 164 (06) :F557-F563