Fine-grained Al2O3-ZrO2 composites by optimization of the processing parameters

被引：15
作者：
Sarraf, Hamid [1 ,2 ]
Herbig, Reinhard [3 ]
Maryska, Martin [2 ]
机构：
[1] Tokyo Inst Technol, Secure Mat Ctr, Mat & Struct Lab, Tokyo 2268503, Japan
[2] Inst Chem Technol, Dept Glass & Ceram, CR-16628 Prague, Czech Republic
[3] Inst Keram Werkstoffe, D-09596 Freiberg, Germany
来源：
SCRIPTA MATERIALIA | 2008年 / 59卷 / 02期
关键词：
Al2O3-ZrO2 ceramic matrix composites (CMC); acoustic methods; casting; grain growth; fine-grained microstructure;
D O I：
10.1016/j.scriptamat.2008.02.050
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A new type of Al2O3-ZrO2 composite was fabricated by optimizing processing parameters with emphasis on improving and controlling fine grain growth and the formation of compact desirable microstructures by using colloidal processing. The electroacoustic technique was used for on-line control of the stability of highly concentrated suspensions. The results gave good correlation between starting powder characteristics, rheological properties, sintering and microstructure of fabricated dense and homogeneous fine-grained Al2O3-ZrO2 Composites (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：155 / 158
页数：4
相关论文
共 50 条
  • [21] Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites
    Baradeswaran, A.
    Perumal, A. Elaya
    COMPOSITES PART B-ENGINEERING, 2014, 56 : 464 - 471
  • [22] Fabrication of black-colored CuO-Al2O3-ZrO2 ceramics via heterogeneous nucleation method
    Wang, Wei
    Liu, Wei
    Yang, Xianfeng
    Xie, Zhipeng
    CERAMICS INTERNATIONAL, 2012, 38 (04) : 2851 - 2856
  • [23] Microstructure, mechanical properties and machining performance of spark plasma sintered Al2O3-ZrO2-TiCN nanocomposites
    Chakravarty, Dibyendu
    Sundararajan, G.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (13-14) : 2597 - 2607
  • [24] Sintering kinetics involving densification and grain growth of 3D printed Ce-ZrO2/Al2O3
    Wu, Haidong
    Liu, Wei
    Lin, Lifu
    Li, Yanhui
    Tian, Zhuo
    Nie, Guanlin
    An, Di
    Li, Hezhen
    Wang, Chengyong
    Xie, Zhipeng
    Wu, Shanghua
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 239
  • [25] The Effect of VC on the Sintering Ability and Microstructure of WC-Al2O3 Composites
    Dong, Weiwei
    Zhu, Shigen
    Ouyang, Chenxin
    MECHANICAL DESIGN AND POWER ENGINEERING, PTS 1 AND 2, 2014, 490-491 : 43 - 48
  • [26] Microstructure and performance optimization of Al2O3/TiC/TiB2/ h-BN@Al2O3 self-lubricating ceramic tool materials
    Chen, Zhaoqiang
    Yang, Yan
    Zhang, Guangfu
    Chen, Hui
    Tian, Congfeng
    Xiao, Guangchun
    Yi, Mingdong
    Zhang, Jingjie
    Zhou, Tingting
    Xu, Chonghai
    CERAMICS INTERNATIONAL, 2023, 49 (20) : 33382 - 33391
  • [27] Preparation and wear resistance of ZrO2 toughened Al2O3 ceramic particles reinforced high chromium cast iron matrix composites by powder sintering and casting
    Gao Y.
    Sun S.
    Qian B.
    Wang X.
    Lv S.
    Zhu Y.
    Ni H.
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (08): : 2676 - 2683
  • [28] In situ synthesis and properties of self-reinforced Si3N4-SiO2-Al2O3-Y2O3 (La2O3) glass-ceramic composites
    Luo, Zhiwei
    Lu, Anxian
    Han, Lei
    Song, Jun
    BULLETIN OF MATERIALS SCIENCE, 2017, 40 (04) : 683 - 690
  • [29] Influence of α-Al2O3 addition on sintering and grain growth behaviour Of 8 mol% Y2O3-stabilised cubic zirconia (c-ZrO2)
    Tekeli, S
    Erdogan, M
    Aktas, B
    CERAMICS INTERNATIONAL, 2004, 30 (08) : 2203 - 2209
  • [30] Colloidal processing of Al2O3-doped zirconia ceramics with CaO-P2O5-SiO2 glass as additive
    Soubelet, Clara G.
    Albano, Maria P.
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (03) : 1141 - 1154
12345