Electrochemical behavior of nanocrystalline Ta/TaN multilayer on 316L stainless steel: Novel bipolar plates for proton exchange membrane fuel-cells

Insufficient corrosion resistance and surface conductivity are two main issues that plague large-scale application of stainless steel (SS) bipolar plates in proton exchange membrane fuel cells (PEMFCs). This study explores the use of nanocrystalline Ta/TaN multilayer coatings to improve the electrical and electrochemical performance of polished 316L SS bipolar plates. The multilayer coatings have been deposited by (reactive) magnetron sputtering and characterized by X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy. The electrochemical behavior of bare and coated substrates has been evaluated in simulated PEMFC working environments by potentiodynamic and potentiostatic polarization tests at ambient temperature and 80 degrees C. The results show that the Ta/TaN multilayer coating increases the polarization resistance of 316L SS by about 30 and 10(4) times at ambient and elevated temperatures, respectively. The interfacial contact resistance (ICR) shows a low value of 12 m Omega x cm(2) before the potentiostatic test. This ICR is significantly lower than for the bare substrate and remains mostly unchanged after potentiostatic polarization for 14 h. In addition, the high contact angle (92 degrees) with water for coated substrates indicates a hydrophobic character, which can improve the water management within the cell in PEMFC stacks. (C) 2016 Elsevier B.V. All rights reserved.