Foaming of Al-Si by TiH2

被引：13

作者：

Sarajan, Zohair ^{[1
]}

Soltani, Mehrdad ^{[2
]}

Khabushan, Jalal Kahani ^{[2
]}

机构：

[1] Islamic Azad Univ, Yazd Branch, Dept Mat Sci & Engn, Safaeeyeh, Yazd, Iran

[2] Shahid Sadughi Tech Sch, Dept Mat Engn, Yazd, Iran

来源：

MATERIALS AND MANUFACTURING PROCESSES | 2011年 / 26卷 / 10期

关键词：

Aluminum; Characterization; Density; Foaming; Structure; TiH2; TITANIUM HYDRIDE; HEAT-TREATMENT; ALUMINUM; TEMPERATURE;

D O I：

10.1080/10426914.2011.551964

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Al-6wt%Si alloy foam was prepared by melt foaming method with the addition of titanium hydride as a blowing agent. The effect of thermal decomposition properties of titanium hydride on the alloy melt foaming behavior and the pores structure was studied. The result shows that the number of pores in the foam with stirring time t(s) of 60 to 150 sec is 120 to 220 per unit area (cm(-2)). At the temperature of 550 degrees C there is a uniform cell structure. The porosity of foamed Al-6wt%Si with TiH2 addition of 1.0wt% has been remarkably increased, and 1.0 to 1.5wt% provided a high uniformity of spherical porosity cell structure distribution besides having a favorable decrease in bulk density.

引用

页码：1293 / 1298

页数：6

共 22 条

[1] Foaming of aluminium-silicon alloy using concentrated solar energy [J].

Cambronero, L. E. G. ;

Canadas, I. ;

Martinez, D. ;

Ruiz-Roman, J. M. .

SOLAR ENERGY, 2010, 84 (06) :879-887

[2] Effect of cell morphology and heat treatment on compressive properties of aluminum foams [J].

Chan, KC ;

Chan, SH .

MATERIALS AND MANUFACTURING PROCESSES, 2004, 19 (03) :407-422

[3] Deformation and damping behaviors of foamed Al-Si-SiCp composite [J].

Gui, MC ;

Wang, DB ;

Wu, JJ ;

Yuan, GJ ;

Li, CG .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 286 (02) :282-288

[4] Sound insulation property of A1-Si closed-cell aluminum foam sandwich panels [J].

Yu, Haijun ;

Yao, Guangchun ;

Wang, Xiaolin ;

Liu, Yihan ;

Li, Hongbin .

APPLIED ACOUSTICS, 2007, 68 (11-12) :1502-1510

[5] Calculation of the liquidus temperature for hypo and hypereutectic aluminum silicon alloys [J].

Hernandez, FCR ;

Djurdjevic, MB ;

Kierkus, WT ;

Sokolowski, JH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 396 (1-2) :271-276

[6] Recycling and formulation of aluminum scrap via mass balance die casting and forming [J].

Hussain, Luay B. ;

Hakim, Issa A. Ali .

MATERIALS AND MANUFACTURING PROCESSES, 2007, 22 (7-8) :916-921

[7] The effect of TiH2 heat treatment on gas release and foaming in Al-TiH2 preforms [J].

Kennedy, AR .

SCRIPTA MATERIALIA, 2002, 47 (11) :763-767

[8] Evaluation of compressive mechanical properties of Al-foams using electrical conductivity [J].

Kim, A ;

Hasan, MA ;

Nahm, SH ;

Cho, SS .

COMPOSITE STRUCTURES, 2005, 71 (02) :191-198

[9]

Kim A., 2008, ACTA MECH SOLIDA SIN, V21, P4

[10] Foaming experiments on LM25 alloy reinforced with SiC particulates [J].

Kumar, N. V. Ravi ;

Rao, N. Ramachandra ;

Sudhakar, B. ;

Gokhale, A. A. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (21-22) :6082-6090

← 1 2 3 →