Issues relating to numerical modelling of creep crack growth

被引：55

作者：

Yatomi, M. ^{[1
]}

Tabuchi, M. ^{[2
]}

机构：

[1] IHI Corp, Res Lab, Isogo Ku, Yokohama, Kanagawa 2358501, Japan

[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan

来源：

ENGINEERING FRACTURE MECHANICS | 2010年 / 77卷 / 15期

关键词：

Creep; Crack growth; FEM; Elevated temperature; C*; Prediction; CONTINUUM DAMAGE; PREDICTION; INITIATION; RUPTURE; STEELS;

D O I：

10.1016/j.engfracmech.2010.04.024

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In this paper creep crack growth behaviour of P92 welds at 923 K are presented. Creep crack growth behaviour for P92 welds are discussed with C* parameter. Creep crack growth behaviour of P92 welds has been compared with that of P91 welds with C* parameter. NSW and NSW-MOD model were compared with the experimental creep crack growth data. Plane strain NSW model significantly overestimates the crack growth rate, and plane stress NSW model underestimates it. Whilst, NSW-MOD model for plane stress and plane strain conditions gives lower and upper bound of the experimental data, respectively. FE analysis of creep crack growth has been conducted. Constrain effect for welded joints has been examined with C* line integrals of C(T) specimens. As a result, constant C* value using the material data of welded joint gives 10 times lower than that of only HAZ property. Whilst, the predicted CCG rates for welded joint are 10 times higher than those for only HAZ properties. Compared with predicted CCG rate from FE analysis and the experimental CCG rate, it can be suggested that creep crack growth tests for lower load level or for large specimen should be conducted, otherwise the experimental data should give unconservative estimation for components operated in long years. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：3043 / 3052

页数：10

共 50 条

[41] Creep Property and Crack Tip Creep Field Analysis of Nickel Base alloy 600
Zhang, J. L.
Jiang, Z. Y.
Mu, S. Y.
Li, H. C.
STRENGTH OF MATERIALS, 2023, 55 (02) : 384 - 390
[42] Mismatch effect in creep properties on creep crack growth behavior in welded joints
Chen, G.
Wang, G. Z.
Xuan, F. Z.
Tu, S. T.
MATERIALS & DESIGN, 2014, 63 : 600 - 608
[43] Models for Small Crack Growth under Creep-Fatigue in Austenitic Steels
Skelton, R. P.
CREEP-FATIGUE INTERACTIONS: TEST METHODS AND MODELS, 2011, 1539 : 142 - 177
[44] Sources of scatter in creep/fatigue crack growth testing and their impact on plant assessment
Dogan B.
Ceyhan U.
Korous J.
Mueller F.
Ainsworth R.
Weld. World, 2007, 7-8 (35-46): : 35 - 46
[45] A theoretical and computational investigation of mixed mode creep crack growth along an interface
Elmukashfi, Elsiddig
Cocks, Alan C. F.
INTERNATIONAL JOURNAL OF FRACTURE, 2021, 229 (02) : 125 - 159
[46] Creep-fatigue crack growth in power-plant materials and components
Saxena, A
ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, 1997, : 51 - 62
[47] Extended finite element method for power-law creep crack growth
Meng, Qinghua
Wang, Zhenqing
ENGINEERING FRACTURE MECHANICS, 2014, 127 : 148 - 160
[48] Multiscale fatigue crack growth modelling for welded stiffened panels
Bozic, Z.
Schmauder, S.
Mlikota, M.
Hummel, M.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2014, 37 (09) : 1043 - 1054
[49] Creep crack growth by grain boundary cavitation under monotonic and cyclic loading
Wen, Jian-Feng
Srivastava, Ankit
Benzerga, Amine
Tu, Shan-Tung
Needleman, Alan
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2017, 108 : 68 - 84
[50] Creep crack initiation and growth in AISI 316 (N) weld - FEM and experiments
Singh, P. Johan
Amaldhasan, S.
Chaswal, V.
Aravindan, S.
MATERIALS AT HIGH TEMPERATURES, 2007, 24 (01) : 57 - 66

← 1 2 3 4 5 →