Analysis of failure mechanisms of Oxide - Oxide ceramic matrix composites

被引：30

作者：

Ramachandran, Karthikeyan ^{[1
]}

Leelavinodhan, Subhashree ^{[1
]}

Antao, Christian ^{[1
]}

Copti, Antony ^{[1
]}

Mauricio, Cantalapiedra ^{[1
]}

Jyothi, Yelisetti Lakshmi ^{[1
]}

Jayaseelan, Doni Daniel ^{[1
]}

机构：

[1] Kingston Univ, Dept Aerosp & Aircraft Engn, Roehampton Vale Campus, London SW15 3DW, England

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2022年 / 42卷 / 04期

关键词：

Ceramic matrix composites; Failure mechanisms; Tensile behaviour; Fatigue behaviour; High temperature testing; Finite element analysis; THERMOMECHANICAL DAMAGE; FRACTURE-BEHAVIOR; CARBON-FIBER; PERFORMANCE; EVOLUTION; STRESS; CREEP;

D O I：

10.1016/j.jeurceramsoc.2021.11.020

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The failure mechanisms of Oxide-Oxide ceramic matrix composites AS-N610 were studied at both room temperature and high temperature using tensile and fatigue tests with and without lateral and laminar notches. The unnotched coupons had an average tensile strength of 423 MPa with elastic modulus of 97 GPa at room temperature showing a perfect elastic behaviour whereas the laminar notched samples shown similar strength of 425 MPa with elastic modulus (98 GPa) revealing pseudo-ductile behaviour. A reduction in tensile strength of the oxide ceramic matrix composites was observed at high temperatures. Thermal shock experiments revealed that the retained strength of the samples quenched from 1100 degrees C deteriorated by similar to 10 % (395 +/- 15 MPa). In all samples, fracture origin was observed on the mid-plane showing a higher degree of fiber pull-out, delamination and pseudo ductile behaviour. Finite element analysis confirmed higher stress concentration on the areas of failures.

引用

页码：1626 / 1634

页数：9

共 29 条

[1]

[Anonymous], 2011, C1359 11

[2]

Ansys, ACAD RES MECH RELEAS

[3]

Chawla K.K., 2013, CERAMIC MATRIX COMPO

[4] The creep mechanism of ceramic matrix composites at low temperature and stress, by a material science approach [J].

Chermant, JL ;

Boitier, G ;

Darzens, S ;

Farizy, G ;

Vicens, J ;

Sangleboeuf, JC .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (14-15) :2443-2460

[5] Development of ZrO2 interfaces for all-oxide composites [J].

Desimone, D. ;

Jayaseelan, D. D. ;

Lee, W. E. ;

Boccaccini, A. R. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2012, 72 (02) :197-203

[6] Mechanical characterisation of a fibre reinforced oxide/oxide ceramic matrix composite [J].

Di Salvo, D. T. ;

Sackett, E. E. ;

Johnston, R. E. ;

Thompson, D. ;

Andrews, P. ;

Bache, M. R. .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (16) :4513-4520

[7] Mechanical hysteresis in ceramic matrix composites [J].

Fantozzi, G. ;

Reynaud, P. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 521-22 :18-23

[8] Annealing effects on creep of polycrystalline alumina-based fibers [J].

Goldsby, JC ;

Yun, HM ;

Morscher, GN ;

DiCarlo, JA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 242 (1-2) :278-283

[9] Creep investigations of alumina-based all-oxide ceramic matrix composites [J].

Hackemann, S. ;

Flucht, F. ;

Braue, W. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (12) :1768-1776

[10] Thermal shock fracture in unidirectional fibre-reinforced ceramic-matrix composites [J].

Kastritseas, C ;

Smith, PA ;

Yeomans, JA .

COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (11-12) :1880-1890

← 1 2 3 →