The tribocorrosion behaviour of YSZ coating deposited on stainless steel substrate in 3.5 wt% NaCl solution

被引：12

作者：

Gao, Zhenxiang ^{[1
]}

Ji, Guojun ^{[1
]}

Shi, Zhiming ^{[2
]}

Wang, Xiaohuan ^{[2
]}

机构：

[1] Inner Mongolia Univ Technol, Coll Chem Engn, Hohhot 010051, Peoples R China

[2] Inner Mongolia Univ Technol, Coll Mat Sci & Engn, Hohhot 010051, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2021年 / 47卷 / 15期

基金：

中国国家自然科学基金;

关键词：

Corrosion wear; Yttria stabilized zirconia; 304 stainless steel; Atmospheric plasma spraying; Potentiostatic polarization; MECHANICAL-PROPERTIES; PITTING CORROSION; 304-STAINLESS-STEEL; MICROSTRUCTURE; RESISTANCE; PERFORMANCE; OXIDATION; SYSTEMS; ARC;

D O I：

10.1016/j.ceramint.2021.04.107

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The YSZ coating was applied to 304 stainless steel substrate by atmospheric plasma spraying technology, and its electrochemical and tribological properties in 3.5 wt% NaCl solution were studied. In electrochemistry, under the action of cathode and anode potential, observe the changes of corrosion current density and EIS before and after wear. The results show that the YSZ coating has a very low corrosion current density during wear and corrosion compared to 304 stainless steel, and after the condition of the anode potential is applied, the effect of friction on the electrochemical impedance of the YSZ coating is very low, while the 304 stainless steel Impedance performance decreases; In terms of tribology, the friction coefficient of 304 stainless steel in 3.5 wt% NaCl solution is easily affected by potential, and the friction coefficient of YSZ coating relative to 304 stainless steel only changes under high potential. As the potential increases, the material volume loss of 304 stainless steel and YSZ coating increases linearly. From the data, the volume loss caused by the corrosion and wear of 304 stainless steel is much higher than that of YSZ coating.

引用

页码：21051 / 21060

页数：10

共 49 条

[1] Electrochemically-induced TiO2 incorporation for enhancing corrosion and tribocorrosion resistance of PEO coating on 7075 Al alloy [J].

Akbari, Ehsan ;

Di Franco, Francesco ;

Ceraolo, Paolo ;

Raeissi, Keyvan ;

Santamaria, Monica ;

Hakimizad, Amin .

CORROSION SCIENCE, 2018, 143 :314-328

[2] Thermo-fluid mechanisms controlling droplet based materials processes [J].

Armster, SQ ;

Delplanque, JP ;

Rein, M ;

Lavernia, EJ .

INTERNATIONAL MATERIALS REVIEWS, 2002, 47 (06) :265-301

[3] Influence of the carbon content on the corrosion and tribocorrosion performance of Ti-DLC coatings for biomedical alloys [J].

Bayon, R. ;

Igartua, A. ;

Gonzalez, J. J. ;

Ruiz de Gopegui, U. .

TRIBOLOGY INTERNATIONAL, 2015, 88 :115-125

[4] Evaluation of microstructure, mechanical and tribological properties of a Babbitt alloy deposited by arc and flame spray processes [J].

Campos Alcover Junior, Paulo Roberto ;

Marenda Pukasiewicz, Anderson Geraldo .

TRIBOLOGY INTERNATIONAL, 2019, 131 :148-157

[5] Tribocorrosion behaviors of CrN coating in 3.5 wt% NaCl solution [J].

Chen, Qiang ;

Cao, Yongzhi ;

Xie, Zhiwen ;

Chen, Tian ;

Wan, Yuanyuan ;

Wang, He ;

Gao, Xu ;

Chen, Yan ;

Zhou, Yanwen ;

Guo, Yuanyuan .

THIN SOLID FILMS, 2017, 622 :41-47

[6] Bi-modal distribution of stabilizers to regulate the dual-phase microstructure and transformability in Nd2O3/Y2O3-doped zirconia ceramics [J].

Chen, Wei ;

Hu, Dong-Li ;

Gu, Hui ;

Qian, Peng-Xiang ;

Vleugels, Jef ;

Jiang, Ying ;

Xing, Juan-Juan .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (14) :4330-4337

[7] Pitting corrosion of sensitised type 304 stainless steel under wet-dry cycling condition [J].

Cheng, Cong-Qian ;

Klinkenberg, Laura-Isabell ;

Ise, Yaoki ;

Zhao, Jie ;

Tada, Eiji ;

Nishikata, Atsushi .

CORROSION SCIENCE, 2017, 118 :217-226

[8] Enhanced Tribocorrosion Resistance of Hard Ceramic Coated Ti-6Al-4V Alloy for Hip Implant Application: In-Vitro Simulation Study [J].

Cheng, Kai-yuan ;

Gopal, Vasanth ;

McNallan, Michael ;

Manivasagam, Geetha ;

Mathew, Mathew T. .

ACS BIOMATERIALS SCIENCE & ENGINEERING, 2019, 5 (09) :4817-4824

[9]

Chetcuti R., 2020, SURF COATING TECHNOL, P384

[10] Mechanical properties and microstructural characterization of a novel 316L austenitic stainless steel coating on A516 Grade 70 carbon steel weld [J].

da Luz, Fernanda Santos ;

Pinheiro, Wagner Anacleto ;

Monteiro, Sergio Neves ;

Candido, Veronica Scarpini ;

Rios da Silva, Alisson Clay .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (01) :636-640

← 1 2 3 4 5 →