Fabrication of Aluminum Pipe from Aluminum Chips by Friction Stir Back Extrusion

被引：3
作者：
Hangai, Yoshihiko [1 ]
Kobayashi, Ryusei [1 ,3 ]
Suzuki, Ryosuke [1 ]
Matsubara, Masaaki [1 ]
Yoshikawa, Nobuhiro [2 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gunma 3768515, Japan
[2] Univ Tokyo, Inst Ind Sci, Tokyo 1538505, Japan
[3] Gunma Univ, Kiryu, Gunma, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS | 2018年 / 82卷 / 02期
关键词：
friction welding; X-ray computed tomography; aluminum; recycle; ALLOY FOAM; POROUS ALUMINUM; BEHAVIOR; MANUFACTURE; PERFORMANCE;
D O I：
10.2320/jinstmet.J2017045
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Aluminum pipes were fabricated from aluminum chips by a Friction Stir Back Extrusion (FSBE). In this process, aluminum chips were densified by material flow induced by a rotating tool plunged into the aluminum chips. It was found that aluminum pipes can be fabricated from aluminum chips by sufficient material flow with no pores and homogeneous thickness. Aluminum pipes fabricated from aluminum chips exhibited similar compression properties to those of aluminum pipes fabricated by a machining process.
引用
收藏
页码：33 / 38
页数：6
相关论文
共 50 条
  • [31] Fabrication and Tensile Tests of Aluminum Foam Sandwich with Dense Steel Face Sheets by Friction Stir Processing Route
    Hangai, Yoshihiko
    Ishii, Nobuyuki
    Koyama, Shinji
    Utsunomiya, Takao
    Kuwazuru, Osamu
    Yoshikawa, Nobuhiro
    [J]. MATERIALS TRANSACTIONS, 2012, 53 (04) : 584 - 587
  • [32] High ductility aluminum alloy made from powder by friction extrusion
    Whalen, Scott
    Olszta, Matthew
    Roach, Christian
    Darsell, Jens
    Graff, Daniel
    Reza-E-Rabby, Md.
    Roosendaal, Timothy
    Daye, Wayne
    Pelletiers, Tom
    Mathaudhu, Suveen
    Overman, Nicole
    [J]. MATERIALIA, 2019, 6
  • [33] Fabrication of Various Types of ADC12 Aluminum Alloy Die Castings Containing Different Amount of Gases and Porous Aluminum Fabricated by Friction Stir Processing
    Hangai, Yoshihiko
    Kato, Hiroki
    Utsunomiya, Takao
    Kitahara, Soichiro
    Kuwazuru, Osamu
    Yoshikawa, Nobuhiro
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2010, 74 (09) : 592 - 597
  • [34] Fabrication of Aluminum Matrix Composites for Automotive Industry Via Multipass Friction Stir Processing Technique
    Adetunla, Adedotun
    Akinlabi, Esther
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2019, 20 (06) : 1079 - 1088
  • [35] Fabrication of A1050-A6061 Functionally Graded Aluminum Foam by Friction Stir Processing Route
    Hangai, Yoshihiko
    Oba, Yutaro
    Koyama, Shinji
    Utsunomiya, Takao
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (12): : 3585 - 3589
  • [36] The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum
    Khorrami, M. Sarkari
    Kazeminezhad, M.
    Kokabi, A. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 602 : 110 - 118
  • [37] Friction stir spot welding of aluminum and wood with polymer intermediate layers
    Xie, Yuming
    Huang, Yongxian
    Meng, Xiangchen
    Li, Junchen
    Cao, Jian
    [J]. CONSTRUCTION AND BUILDING MATERIALS, 2020, 240 (240)
  • [38] Effect of interlayers on softening of aluminum friction stir welds
    Mokabberi, S. R.
    Movahedi, M.
    Kokabi, A. H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 727 : 1 - 10
  • [39] Manufacture of Porous Aluminum by Utilizing Friction Stir Processing
    Hangai, Yoshihiko
    Utsunomiya, Takao
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (02) : 131 - 133
  • [40] Friction stir spot welding of 6016 aluminum alloy
    Mishra, R. S.
    Freeney, T. A.
    Webb, S.
    Chen, Y. L.
    Gayden, X. Q.
    Herling, D. R.
    Grant, G. J.
    [J]. FRICTION STIR WELDING AND PROCESSING IV, 2007, : 341 - +
12345