Fabrication of Aluminum Pipe from Aluminum Chips by Friction Stir Back Extrusion

被引：3
|
作者：
Hangai, Yoshihiko [1 ]
Kobayashi, Ryusei [1 ,3 ]
Suzuki, Ryosuke [1 ]
Matsubara, Masaaki [1 ]
Yoshikawa, Nobuhiro [2 ]
机构：
[1] Gunma Univ, Grad Sch Sci & Technol, Kiryu, Gunma 3768515, Japan
[2] Univ Tokyo, Inst Ind Sci, Tokyo 1538505, Japan
[3] Gunma Univ, Kiryu, Gunma, Japan
来源：
JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS | 2018年 / 82卷 / 02期
关键词：
friction welding; X-ray computed tomography; aluminum; recycle; ALLOY FOAM; POROUS ALUMINUM; BEHAVIOR; MANUFACTURE; PERFORMANCE;
D O I：
10.2320/jinstmet.J2017045
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Aluminum pipes were fabricated from aluminum chips by a Friction Stir Back Extrusion (FSBE). In this process, aluminum chips were densified by material flow induced by a rotating tool plunged into the aluminum chips. It was found that aluminum pipes can be fabricated from aluminum chips by sufficient material flow with no pores and homogeneous thickness. Aluminum pipes fabricated from aluminum chips exhibited similar compression properties to those of aluminum pipes fabricated by a machining process.
引用
收藏
页码：33 / 38
页数：6
相关论文
共 50 条
  • [1] Fabrication of Porous Aluminum Filled Aluminum Pipe from Aluminum Recycle Chips by Friction Stir Back Extrusion
    Hangai, Yoshihiko
    Kobayashi, Ryusei
    Suzuki, Ryosuke
    Matsubara, Masaaki
    Yoshikawa, Nobuhiro
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2019, 83 (08) : 288 - 291
  • [2] Aluminum Foam-Filled Steel Tube Fabricated from Aluminum Burrs of Die-Castings by Friction Stir Back Extrusion
    Hangai, Yoshihiko
    Kobayashi, Ryusei
    Suzuki, Ryosuke
    Matsubara, Masaaki
    Yoshikawa, Nobuhiro
    METALS, 2019, 9 (02)
  • [3] Fabrication of bilayer tube consisting of outer aluminum foam tube and inner dense aluminum tube by friction stir back extrusion
    Hangai, Yoshihiko
    Otazawa, Shunsuke
    Utsunomiya, Takao
    Suzuki, Ryosuke
    Koyama, Shinji
    Matsubara, Masaaki
    Yoshikawa, Nobuhiro
    MATERIALS TODAY COMMUNICATIONS, 2018, 15 : 36 - 42
  • [4] Aluminum alloy foam-filled aluminum tube fabricated by friction stir back extrusion and its compression properties
    Hangai, Yoshihiko
    Otazawa, Shunsuke
    Utsunomiya, Takao
    COMPOSITE STRUCTURES, 2018, 183 : 416 - 422
  • [5] Fabrication of Porous Aluminum by Friction Stir Processing
    Yoshihiko Hangai
    Takao Utsunomiya
    Metallurgical and Materials Transactions A, 2009, 40 : 275 - 277
  • [6] Al-SiC Metal Matrix Composite production through Friction Stir Extrusion of aluminum chips
    Baffari, Dario
    Buffa, Gianluca
    Campanella, Davide
    Fratini, Livan
    INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 419 - 424
  • [7] Fabrication of Aluminum Foam/Dense Steel Composite by Friction Stir Welding
    Hangai, Yoshihiko
    Koyama, Shinji
    Hasegawa, Makoto
    Utsunomiya, Takao
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (09): : 2184 - 2186
  • [8] Fabrication of Aluminum Tubes Filled with Aluminum Alloy Foam by Friction Welding
    Hangai, Yoshihiko
    Nakano, Yukiko
    Koyama, Shinji
    Kuwazuru, Osamu
    Kitahara, Soichiro
    Yoshikawa, Nobuhiro
    MATERIALS, 2015, 8 (10): : 7180 - 7190
  • [9] Microstructure Evolution and Mechanical Property Characterization of 6063 Aluminum Alloy Tubes Processed with Friction Stir Back Extrusion
    Zhang, Suhong
    Frederick, Alan
    Wang, Yiyu
    Eller, Mike
    McGinn, Paul
    Hu, Anming
    Feng, Zhili
    JOM, 2019, 71 (12) : 4436 - 4444
  • [10] Aluminum Friction Stir Weldbonding
    Braga, Daniel F. O.
    de Sousa, L. M. C.
    Infante, V.
    da Silva, Lucas F. M.
    Moreira, P. M. G. P.
    ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL, 2015, 114 : 223 - 231
12345