Evaluation of Mechanical Properties and Structure of 1100-Al Reinforced with Zro2 Nano-Particles via Accumulatively Roll-Bonded

被引：20
作者：
Salimi, A. [1 ]
Borhani, E. [1 ]
Emadoddin, E. [1 ]
机构：
[1] Semnan Univ, Dept Mat Sci & Engn, Semnan, Iran
来源：
5TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS, UFGNSM15 | 2015年 / 11卷
关键词：
ARB; nanocomposites; ZrO2; nano-particles; ALUMINUM-ALLOY; MICROSTRUCTURE; NANOPARTICLES; FABRICATION; COMPOSITES; REFINEMENT; STRENGTH;
D O I：
10.1016/j.mspro.2015.11.094
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this study, aluminium metal composites reinforced with Zirconium dioxide (ZrO2) nano-particles in different of volume percentage are manufactured through accumulative roll bonding. The results indicate that with the application of 10 ARB cycles and the composite microstructure shows excellent ZrO2 particle distribution in the Al matrices. The X-ray diffraction results also showed that nanostructured Al/ZrO2 Nanocomposite with the average crystallite size of 48.6 nm was successfully achieved by employing 10 cycles of ARB process. According to the results of this study, the tensile, hardness, and elongation properties of the Al/ZrO2 composite are determined for 0.50, 0.75 and 1 vol.% ZrO2. (C) 2015 Published by Elsevier Ltd.
引用
收藏
页码：67 / 73
页数：7
相关论文
共 27 条
[1]   Fabrication of nanostructured Al/Cu/Mn metallic multilayer composites by accumulative roll bonding process and investigation of their mechanical properties [J].
Alizadeh, Morteza ;
Samiei, Mohammad .
MATERIALS & DESIGN, 2014, 56 :680-684
[2]   Accumulative press bonding; a novel manufacturing process of nanostructured metal matrix composites [J].
Amirkhanlou, Sajjad ;
Ketabchi, Mostafa ;
Parvin, Nader ;
Khorsand, Shohreh ;
Bahrami, Reza .
MATERIALS & DESIGN, 2013, 51 :367-374
[3]   Investigation of grain refinement in Al/Al2O3/B4C nano-composite produced by ARB [J].
Beni, Hossein Akbari ;
Alizadeh, Morteza ;
Ghaffari, Mohammad ;
Amini, Rasool .
COMPOSITES PART B-ENGINEERING, 2014, 58 :438-442
[4]   Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process [J].
Eizadjou, Mehdi ;
Manesh, Habib Danesh ;
Janghorban, Kamal .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 474 (1-2) :406-415
[5]   Layer continuity in accumulative roll bonding of dissimilar material combinations [J].
Govindaraj, Nagaraj Vinayagam ;
Frydendahl, Jan Gaute ;
Holmedal, Bjorn .
MATERIALS & DESIGN, 2013, 52 :905-915
[6]   Comparison of microparticles and nanoparticles effects on the microstructure and mechanical properties of steel-based composite and nanocomposite fabricated via accumulative roll bonding process [J].
Jamaati, Roohollah ;
Toroghinejad, Mohammad Reza ;
Edris, Hossein ;
Salmani, Mohammad Reza .
MATERIALS & DESIGN, 2014, 56 :359-367
[7]   Effect of SiC nanoparticles on the mechanical properties of steel-based nanocomposite produced by accumulative roll bonding process [J].
Jamaati, Roohollah ;
Toroghinejad, Mohammad Reza ;
Edris, Hossein .
MATERIALS & DESIGN, 2014, 54 :168-173
[8]   Effect of particle size on microstructure and mechanical properties of composites produced by ARB process [J].
Jamaati, Roohollah ;
Amirkhanlou, Sajjad ;
Toroghinejad, Mohammad Reza ;
Niroumand, Behzad .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (4-5) :2143-2148
[9]   Effect of Al2O3 nano-particles on the bond strength in CRB process [J].
Jamaati, Roohollah ;
Toroghinejad, Mohammad Reza .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (18-19) :4858-4863
[10]   Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding [J].
Jamaati, Roohollah ;
Toroghinejad, Mohammad Reza .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (16-17) :4146-4151
123