Sn-Ag solder bump formation for flip-chip bonding by electroplating

被引：39
|
作者：
Arai, S [1 ]
Akatsuka, H [1 ]
Kaneko, N [1 ]
机构：
[1] Shinshu Univ, Fac Engn, Dept Chem & Mat Engn, Nagano 3808553, Japan
来源：
JOURNAL OF THE ELECTROCHEMICAL SOCIETY | 2003年 / 150卷 / 10期
关键词：
D O I：
10.1149/1.1606687
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Pb-free Sn-Ag alloy solder bumps for flip-chip bonding were formed by electroplating with the aid of a photolithography. Pyrophosphate-iodide baths were used for the plating bath. Smooth, fine-grained Sn-Ag alloy films were obtained using a bath containing both polyethylene glycol (mean molecular weight 600, PEG600) and formaldehyde (HCHO) additives. Sn-Ag alloy films with near eutectic compositions (Sn-3.8 atom % Ag) were obtained under both galvanostatic and potentiostatic conditions. All of the Sn-Ag alloy films deposited consisted of beta-Sn phase and epsilon(Ag(3)Sn) phase. Straight-walled bumps and mushroom bumps were formed under both galvanostatic and potentiostatic conditions from the pyrophosphate-iodide bath containing both PEG600 and HCHO. Mushroom bumps with smooth surfaces and homogeneous composition were obtained under potentiostatic conditions. (C) 2003 The Electrochemical Society.
引用
收藏
页码：C730 / C734
页数：5
相关论文
共 50 条
  • [31] Flip-chip bonding on PCB with electroless Ni-P and stencil printed solder bump
    Cho, MK
    Kang, SY
    Kwon, YH
    Jang, DH
    Kim, NS
    SMTA INTERNATIONAL PROCEEDINGS OF THE TECHNICAL PROGRAM, 1999, : 159 - 164
  • [32] Flip-chip bonding of MEMS scanner for laser display using electroplated AuSn solder bump
    Chu, Kun-Mo
    Choi, Won-Kyoung
    Ko, Young-Chul
    Lee, Jin-Ho
    Park, Hyo-Hoon
    Jeon, Duk Young
    IEEE TRANSACTIONS ON ADVANCED PACKAGING, 2007, 30 (01): : 27 - 33
  • [33] Electromigration and thermomigration characteristics in flip chip Sn-3.5Ag solder bump
    Lee, Jang-Hee
    Lim, Gi-Tae
    Yang, Seung-Taek
    Suh, Min-Suk
    Chung, Qwan-Ho
    Byun, Kwang-Yoo
    Park, Young-Bae
    JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, 2008, 46 (05): : 310 - 314
  • [34] Nucleation rates of Sn in undercooled Sn-Ag-Cu flip-chip solder joints
    Arfaei, B.
    Benedict, M.
    Cotts, E. J.
    JOURNAL OF APPLIED PHYSICS, 2013, 114 (17)
  • [35] Fluxless Sn-rich Sn-Au flip-chip bonding using electroplating processes
    Kim, J
    Lee, CC
    2005 10TH INTERNATIONAL SYMPOSIUM ON ADVANCED PACKAGING MATERIALS: PROCESSES, PROPERTIES AND INTERFACES, 2005, : 164 - 168
  • [36] Influence of Cu content on compound formation near the chip side for the flip-chip Sn-3.0Ag-(0.5 or 1.5)Cu solder bump during aging
    Guh-Yaw Jang
    Jeng-Gong Duh
    Hideyuki Takahashi
    Szu-Wei Lu
    Jen-Chuan Chen
    Journal of Electronic Materials, 2006, 35 : 1745 - 1754
  • [37] The effects of electroplating parameters on the composition and morphology of Sn-Ag solder
    Kim, JY
    Yu, J
    Lee, JH
    Lee, TY
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (12) : 1459 - 1464
  • [38] The effects of electroplating parameters on the composition and morphology of Sn-Ag solder
    J. Y. Kim
    J. Yu
    J. H. Lee
    T. Y. Lee
    Journal of Electronic Materials, 2004, 33 : 1459 - 1464
  • [39] Effect of Cu stud microstructure and electroplating process on intermetallic compounds growth and reliability of flip-chip solder bump
    Xiao, GW
    Chan, PCH
    Teng, A
    Cai, J
    Yuen, MMF
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2001, 24 (04): : 682 - 690
  • [40] Investigation of void-free electroplating method on copper column based solder bump for flip-chip interconnections
    Yamada, Hiroshi
    EMAP 2005: INTERNATIONAL SYMPOSIUM ON ELECTRONICS MATERIALS AND PACKAGING, 2005, : 112 - 117
12345