Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators

被引：102

作者：

Layek, Apurba ^{[1
]}

Saini, J. S.

Solanki, S. C.

机构：

[1] NIT Durgapur, Dept Mech Engn, Durgapur 713209, India

[2] Indian Inst Technol Roorkee, Dept Mech & Ind Engn, Roorkee 247667, Uttar Pradesh, India

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2007年 / 50卷 / 23-24期

关键词：

compound-roughness; heat transfer coefficient; friction factor; chamfer angle and groove position;

D O I：

10.1016/j.ijheatmasstransfer.2007.02.042

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

An experimental investigation on heat and fluid flow characteristics of fully developed turbulent flow in a rectangular duct having repeated integral transverse chamfered rib-groove roughness on one broad wall has been carried out. Experiments encompassed the Reynolds number range of 3000-21,000; relative roughness pitch of 4.5-10, chamfer angle of 5 degrees-30 degrees, relative groove position of 0.3-0.6 and relative roughness height of 0.022-0.04. The effect of roughness parameters on Nusselt number and friction factor have been discussed and the results are compared with the results of square rib-grooved and smooth duct under similar flow conditions. The conditions for the best performance have been determined. Correlations for the Nusselt number and friction factor have been developed as a function of roughness parameters and flow Reynolds number. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：4845 / 4854

页数：10

共 14 条

[1]

Dipprey D., 1963, Int. J. Heat Mass Transfer, V6, P329, DOI [10.1016/0017-9310(63)90097-8, DOI 10.1016/0017-9310(63)90097-8]

[2]

Duffie JA., 1980, Solar engineering of thermal processes

[3]

GUPTA D, 1993, THESIS U ROORKEE ROO

[4] HEAT-TRANSFER AND FRICTION IN CHANNELS WITH 2 OPPOSITE RIB-ROUGHENED WALLS [J].

HAN, JC .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1984, 106 (04) :774-781

[5]

Kakac S., 1987, HDB SINGLE PHASE CON

[6] Heat transfer coefficient and friction factor correlations for the transitional flow regime in rib-roughened rectangular ducts [J].

Karwa, R ;

Solanki, SC ;

Saini, JS .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (09) :1597-1615

[7]

Kline S.J., 1952, ASME Mechanical Engineering, V75, P3, DOI DOI 10.1016/J.CHAOS.2005.11.046

[8] TURBULENT HEAT-TRANSFER AUGMENTATION AND FRICTION IN PERIODIC FULLY-DEVELOPED CHANNEL FLOWS [J].

LIOU, TM ;

HWANG, JJ .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1992, 114 (01) :56-64

[9] EFFECT OF RIDGE SHAPES ON TURBULENT HEAT-TRANSFER AND FRICTION IN A RECTANGULAR CHANNEL [J].

LIOU, TM ;

HWANG, JJ .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1993, 36 (04) :931-940

[10] EFFECT OF ARTIFICIAL ROUGHNESS ON HEAT-TRANSFER AND FRICTION FACTOR IN A SOLAR AIR HEATER [J].

PRASAD, BN ;

SAINI, JS .

SOLAR ENERGY, 1988, 41 (06) :555-560

← 1 2 →