Multi response assessment of EN19 alloy steel in CNC milling process using Fuzzy matter element methodology

被引：0
|
作者：
Chalisgaonkar, Rupesh [1 ]
Agrawal, Varun [1 ,2 ]
Rathore, Sachin [1 ]
Khan, K. L. A. [1 ]
机构：
[1] KIET Grp Inst, Dept Mech Engn, Ghaziabad 201206, India
[2] Natl Inst Technol, Calicut, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 64卷
关键词：
Vertical Machining Centre (VMC); EN19 alloy steel; Taguchi?s Design of Experiments (DOE); Titanium nitride coated carbide end mill; Fuzzy matter element(FME); TOOL;
D O I：
10.1016/j.matpr.2022.03.713
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this research work, development of a multi response assessment technique was considered using Fuzzy matter element methodology for material removal rate(MRR) and surface roughness(SR) of milling on CNC Vertical Machining Set up. EN19 alloy steel was selected as work material for experimentation. Material removal rate (MRR) and surface roughness (SR) were investigated in milling operation after varying the level statistically of cutting speed, depth of cut and feed rate. Two types of milling cutters (titanium nitride coated carbide and solid carbide end mill) were selected to do the operation. Fuzzy matter element methodology was found to be successful to select the best tool for this experiment. Copyright (c) 2022 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the Innovative Technologies in Mechanical Engineering-2021.
引用
收藏
页码：1239 / 1243
页数：5
相关论文
共 49 条
  • [21] Multi-Response Optimization of CNC WEDM Process Parameters for Machining Titanium alloy Ti 6Al-4V using Response Surface Methodology (RSM)
    Nandakumar, C.
    Mohan, B.
    ENGINEERING AND MANUFACTURING TECHNOLOGIES, 2014, 541-542 : 354 - +
  • [22] Multi response optimization of nozzle process parameters in MQL assisted face milling of AISI 52,100 alloy steel using TGRA
    Rana, Mohit
    Singh, Talvinder
    Saini, Abhineet
    Singh, Jaswinder
    Sharma, Vijay Kumar
    Singh, Maninderjeet
    Rooprai, Ranbir Singh
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3177 - 3182
  • [23] Optimal Selection of process parameters in CNC end milling of Al 7075-T6 aluminium alloy using a Taguchi-Fuzzy approach
    Mahesh, Thakur Paramjit
    Rajesh, R.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2493 - 2502
  • [24] Multi response optimization of process parameters using grey relational analysis for milling of hardened Custom 465 steel
    Kanchana, J.
    Prasath, V
    Krishnaraj, V
    Priyadharshini, Geetha B.
    DIGITAL MANUFACTURING TRANSFORMING INDUSTRY TOWARDS SUSTAINABLE GROWTH, 2019, 30 : 451 - 458
  • [25] Optimization of process parameters of rotary friction welding of low alloy steel tubes using response surface methodology
    Selvaraj, R.
    Shanmugam, K.
    Selvaraj, P.
    Nagasai, B. Prasanna
    Balasubramanian, V
    FORCES IN MECHANICS, 2023, 10
  • [26] Assessment of Surface Roughness in Milling of Beech Using a Response Surface Methodology and an Adaptive Network-Based Fuzzy Inference System
    Zhu, Zhaolong
    Jin, Dong
    Wu, Zhanwen
    Xu, Wei
    Yu, Yingyue
    Guo, Xiaolei
    Wang, Xiaodong
    MACHINES, 2022, 10 (07)
  • [27] Experimental investigations and optimization of surface roughness in turning of en 36 alloy steel using response surface methodology and genetic algorithm
    Panwar, Vishwanath
    Sharma, Dilip Kumar
    Kumar, K. V. Pradeep
    Jain, Ankit
    Thakar, Chetan
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 6474 - 6481
  • [28] Machinability of wood-plastic composites from the CNC milling process using the Box-Behnken design and response surface methodology for building applications
    Homkhiew, Chatree
    Cheewawuttipong, Watthanaphon
    Srivabut, Chainarong
    Boonchouytan, Worapong
    Rawangwong, Surasit
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2025, 38 (01) : 161 - 187
  • [29] Multi-Response Optimization of Surface Grinding Process Parameters of AISI 4140 Alloy Steel Using Response Surface Methodology and Desirability Function under Dry and Wet Conditions
    Roy, Rakesh
    Ghosh, Sourav Kumar
    Kaisar, Tanvir Ibna
    Ahmed, Tazim
    Hossain, Shakhawat
    Aslam, Muhammad
    Kaseem, Mosab
    Rahman, Md Mahfuzur
    COATINGS, 2022, 12 (01)
  • [30] Optimization of Ball Burnishing Process on Tool Steel (T215Cr12) in CNC Machining Centre Using Response Surface Methodology
    M. R. Stalin John
    B. K. Vinayagam
    Arabian Journal for Science and Engineering, 2011, 36 : 1407 - 1422
12345