Partially amorphous stainless steel coatings: Microstructure, annealing behavior and statistical optimization of spray parameters

被引：21
作者：
Zois, D. [1 ,2 ]
Lekatou, A. [1 ]
Vardavoulias, M. [2 ]
Vaimakis, T. [3 ]
Karantzalis, A. E. [1 ]
机构：
[1] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece
[2] Pyrogenesis SA, Lavrion 19500, Greece
[3] Univ Ioannina, Dept Chem, GR-45110 Ioannina, Greece
来源：
SURFACE & COATINGS TECHNOLOGY | 2011年 / 206卷 / 06期
关键词：
HVOF; Stainless steels; Metallic glass; DSC; XRD; Taguchi analysis; GLASS-FORMING ABILITY; BULK METALLIC GLASSES; THERMAL-STABILITY; MECHANICAL-PROPERTIES; CORROSION-RESISTANCE; RESIDUAL-STRESSES; ALLOY COATINGS; VELOCITY; ZR; POWDER;
D O I：
10.1016/j.surfcoat.2011.09.023
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A stainless steel powder of a mixed amorphous and crystalline structure was HVOF sprayed in an effort to produce coatings with a large glass fraction. In the first part of this work, the microstructure and annealing behavior of powder and coatings are studied. The coatings consisted of a glassy part and a martensitic part, the latter with boride, borosilicide and boro-carbide dispersions. The annealing behavior of powder and coatings is characterized by glass crystallization and martensite tempering. Annealing of the powder leads to complete microcrystallization of the glassy part, whereas annealing of the coatings eventually leads to nanocrystallization of the residual glass phase. In the second part, the effects of selected spraying parameters (oxygen-to-fuel ratio, powder feed rate, spraying distance and spraying stages) on characteristic coating properties are investigated by means of the Taguchi analysis. The oxygen-to-fuel ratio mostly affected the coating hardness and porosity. The powder feed rate had a significant effect on all the coating properties but mostly on the deposition rate and crack extension force. Spraying in stages significantly increased the deposition rate, whereas it promoted coating amorphicity. A spraying experiment under the optimum conditions determined by the Taguchi analysis, showed a good fit between the predicted and the attained property values. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码：1469 / 1483
页数：15
相关论文
共 73 条
[41]  
LIN YJ, 1991, J MATER SCI, V26, P2833, DOI 10.1007/BF02387759
[42]   Microstructure and properties of Fe-based amorphous metallic coating produced by high velocity axial plasma spraying [J].
Liu, X. Q. ;
Zheng, Y. G. ;
Chang, X. C. ;
Hou, W. L. ;
Wang, J. Q. ;
Tang, Z. ;
Burgess, A. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 484 (1-2) :300-307
[43]   Amorphous and nanocrystalline Al82Ni10Y8 alloy powder prepared by gas atomization [J].
Liu, Y ;
Liu, ZM ;
Guo, S ;
Du, Y ;
Huang, BY ;
Huang, JS ;
Chen, SQ ;
Liu, FX .
INTERMETALLICS, 2005, 13 (3-4) :393-398
[44]   Bulk metallic glasses [J].
Löffler, JF .
INTERMETALLICS, 2003, 11 (06) :529-540
[45]   Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings [J].
Lugscheider, E ;
Herbst, C ;
Zhao, LD .
SURFACE & COATINGS TECHNOLOGY, 1998, 108 (1-3) :16-23
[46]   Indentation fracture behavior of plasma-sprayed nanostructured Al2O3-13wt.%TiO2 coatings [J].
Luo, H ;
Goberman, D ;
Shaw, L ;
Gell, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 346 (1-2) :237-245
[47]   Influence of parameters of the HVOF thermal spray process on the properties of multicomponent white cast iron coatings [J].
Maranho, O. ;
Rodrigues, D. ;
Boccalini, A., Jr. ;
Sinatora, A. .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (15) :3494-3500
[48]   TEMPERATURE EVOLUTION OF PLASMA-SPRAYED NIOBIUM PARTICLES IMPACTING ON A SUBSTRATE [J].
MOREAU, C ;
CIELO, P ;
LAMONTAGNE, M ;
DALLAIRE, S ;
KRAPEZ, JC ;
VARDELLE, M .
SURFACE & COATINGS TECHNOLOGY, 1991, 46 (02) :173-187
[49]  
NARASIMHAN KS, 2007, P 2007 INT C POWD ME
[50]   Oxidation during electric arc spray forming of steel [J].
Newbery, A. P. ;
Grant, P. S. .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 178 (1-3) :259-269
12345678