A comparative study on extraction of Fe(III) from chloride leach liquor using TBP, Cyanex 921 and Cyanex 923

被引：89

作者：

Mishra, R. K. ^{[1
]}

Rout, P. C. ^{[1
]}

Sarangi, K. ^{[1
]}

Nathsarma, K. C. ^{[1
]}

机构：

[1] CSIR, Inst Minerals & Mat Technol, Bhubaneswar 751013, Orissa, India

来源：

HYDROMETALLURGY | 2010年 / 104卷 / 02期

关键词：

Iron; Solvent extraction; TBP; Cyanex; 921; 923; IRON(III); IRON; ACID; MIBK;

D O I：

10.1016/j.hydromet.2010.07.003

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

A comparative study on extraction of Fe(III) from the HCl leach liquor of low grade iron ore tailings has been carried out using Tri-n-butyl phosphate (TBP), Cyanex 921 and Cyanex 923 in distilled kerosene. The percentage extraction of iron increased with increasing HCl and extractant concentrations. The extracted species in each case was found to be HFeCl4-S. The extraction isotherms for the above extractants indicated quantitative extraction of Fe(III) in 3-stages at O:A ratio of 3:2 with TBP, and in 2-stages at O:A ratio of 1:1 with Cyanex 921 and Cyanex 923. The stripping studies of the loaded organic phases were carried out with 0.4 M HCl. The stripping isotherms indicated 2-stages at O:A ratio of 5:2 for TBP, and 3-stages at O:A ratio of 2:3 for Cyanex 921 and Cyanex 923. From the extraction studies, the extraction efficiency of the extractants for Fe(III) was in the order TBP<Cyanex 921<Cyanex 923. Although Cyanex 923 was found to be the best extractant, the percentage stripping of Fe from the loaded Cyanex 923 was the least. The stripping of Cyanex 923 was 94.9%, but with TBP and Cyanex 921, it was 99.8% and >99.9%, respectively. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：298 / 303

页数：6

共 8 条

[1] Extraction of acid and iron values from sulphate waste pickle liquor of a steel industry by solvent extraction route [J].

Agrawal, Archana ;

Kumarl, S. ;

Ray, B. C. ;

Sahu, K. K. .

HYDROMETALLURGY, 2007, 88 (1-4) :58-66

[2]

COLTHUP NB, 1990, INTRO INFRARED RAMAN, P362

[3] Recovery of iron and copper from spent HCl used to clean up dirty car radiators [J].

Rabah, MA .

HYDROMETALLURGY, 2000, 56 (01) :75-92

[4] Extraction of iron(III) at macro-level concentrations using TBP, MIBK and their mixtures [J].

Reddy, BR ;

Sarma, PVRB .

HYDROMETALLURGY, 1996, 43 (1-3) :299-306

[5] Mixed solvent systems for the extraction and stripping of iron(III) from concentrated acid chloride solutions [J].

Sahu, KK ;

Das, RP .

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2000, 31 (06) :1169-1174

[6] Extraction of iron(III) from acidic chloride solutions by Cyanex 923 [J].

Saji, J ;

Rao, TP ;

Iyer, CSP ;

Reddy, MLP .

HYDROMETALLURGY, 1998, 49 (03) :289-296

[7] Liquid-liquid extraction separation of iron(III) from titania wastes using TBP-MIBK mixed solvent system [J].

Saji, J ;

Reddy, MLP .

HYDROMETALLURGY, 2001, 61 (02) :81-87

[8] Iron(III) extraction by LIX 860 and its influence on copper(II) extraction from sulphuric solutions [J].

Simpson, J ;

Navarro, P ;

Alguacil, FJ .

HYDROMETALLURGY, 1996, 42 (01) :13-20

← 1 →