Study on effect of residual stress distributions on kinetics of static strain aging after cold rolling

被引:4
|
作者
Koohbor, B. [1 ]
Serajzadeh, S. [1 ]
机构
[1] Sharif Univ Technol, Dept Mat Sci & Engn, Tehran, Iran
关键词
Cold rolling; Static strain aging; Residual stress distribution; Mathematical model; LOW-CARBON-STEEL; WIRE;
D O I
10.1179/026708310X12815992418454
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present research, the effect of residual stress distribution on the static strain aging (SSA) phenomenon in cold rolled steel was investigated. A three-dimensional model was employed to evaluate the residual stress distributions within the rolled strips, and hole drilling experiments were also performed to verify the data obtained from the mathematical model. Hardness and tensile tests were then performed on the cold rolled samples at different temperatures and aging periods, and the results of these tests were utilised to assess SSA behaviour after different rolling programs. The results show that SSA occurs within the cold rolled steel in the employed aging period, and its kinetics is affected by residual hydrostatic stresses. Additionally, the variation in residual hydrostatic stress distribution due to deformation path, e. g. single-and two-pass rolling layouts, slightly affects the activation energy of SSA and changes the kinetics of SSA after cold rolling.
引用
收藏
页码:1620 / 1626
页数:7
相关论文
共 50 条
  • [1] Kinetics of static strain aging after temper rolling of low carbon steel
    Koohbor, B.
    Serajzadeh, S.
    IRONMAKING & STEELMAKING, 2011, 38 (04) : 314 - 320
  • [2] Prediction of residual stress after cold rolling and coiling processes
    Amado, Flavio Peres
    Gurova, Tetyana
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2025, 60 (01): : 49 - 58
  • [3] The study of residual stress distribution in preforms after cold longitudinal rolling in idler rollers
    Agas'yants, G.A.
    Kuznechno-Shtampovochnoe Proizvodstvo (Obrabotka Metallov Davleniem), 2001, (12): : 21 - 26
  • [4] ON THE KINETICS OF STATIC AND DYNAMIC STRAIN-AGING
    SCHLIPF, J
    SCRIPTA METALLURGICA ET MATERIALIA, 1994, 31 (07): : 909 - 914
  • [5] Stress and residual stress distributions in plane strain bending
    Zhang, ZT
    Hu, SJ
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1998, 40 (06) : 533 - 543
  • [6] NUMERICAL STUDY OF THE WORKPIECE ROTATION EFFECT ON THE STRAIN AND RESIDUAL STRESS DISTRIBUTION IN THE COLD RADIAL FORGING PROCESS
    Afrasiab, H.
    Movahhedy, M. R.
    PROCEEDINGS OF THE ASME 10TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, 2010, VOL 4, 2010, : 785 - 792
  • [7] Measurement of Residual Stress by Cutting Method in Cold Ring Rolling
    Zuo, Z. J.
    Fu, L. R.
    Li, Y.
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 329 - 333
  • [8] X Ray Measurement for Residual Stress in Cold Ring Rolling
    Zuo, Zhijiang
    Yu, Wuxin
    Yang, Junjie
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 1647 - 1650
  • [9] A Model of Surface Residual Stress Distribution of Cold Rolling Spline
    Ding, Z. H.
    Cui, F. K.
    Liu, Y. B.
    Li, Y.
    Xie, K. G.
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2017, 2017
  • [10] Effect of Deep Cold Rolling on Residual Stress Distributions Between the Treated and Untreated Regions on Ti-6Al-4V Alloy
    Lim, Andre
    Castagne, Sylvie
    Wong, Chow Cher
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (11):